In this article
The short answer
Read a raw material SDS by question, not page by page. Section 1.2 shows whether the supplier advises against cosmetic use. Section 2 gives the hazard codes for the neat material: H317 means skin sensitiser, H411 an aquatic hazard, and EUH208 names a sensitiser present at or above 0.1% (0.01% for the strongest). Section 3 lists only hazardous ingredients above set cut offs, so it is not an allergen list; read the top of any range. Section 9 gives the flash point (60 °C or below is flammable for transport) and section 14 the UN number. Section 16 shows the revision date; REACH has no expiry date, but updates are required when hazard information changes. On an IFRA certificate, check the code, the Amendment (the 51st is current) and the maximum level in the row for your product category.
Key takeaways
- Section 1.2 of an SDS, uses advised against, tells you whether the supplier supports cosmetic use. Read it before anything else.
- Hazard codes describe the neat raw material. H317 on a fragrance oil is normal; whether it is safe at 1% in your lotion is a question for the CPSR.
- EUH208 means a named sensitiser is present at or above 0.1% (0.01% for the strongest) in a mixture that is not itself classified as a sensitiser.
- Section 3 lists only hazardous substances above cut offs, so allergens below 0.1% can be missing. It never replaces an allergen statement with percentages.
- A flash point of 60 °C or below puts a liquid in transport class 3; UN3082 shows an environmental hazard, and packs of 5 litres or less are generally exempt.
- An SDS has no legal expiry date, but it must be updated without delay when hazard information changes. EU and GB sheets now follow slightly different versions of Annex II.
- An IFRA certificate should name your exact product, state the 51st Amendment, and be read in your product's category row only. A face cream is 5B, not 5A.
Here is a situation we see regularly. A maker who started with candles moves one of her best selling candle scents into a body oil and sends us the formula, the fragrance supplier's SDS and an IFRA certificate. Section 1.2 of the SDS, a few lines from the top of page one, reads: Uses advised against: cosmetic products. The IFRA certificate lists only Category 12. Nothing has been hidden from her. The answers are printed on the first page; she just didn't know where to look.
This guide is about where to look. It is a decoder for the lines, codes and numbers on a raw material Safety Data Sheet and an IFRA certificate: what H317 and EUH208 mean in practice, why the composition section is not an allergen list, how to read a range like 10 to 25%, how a flash point turns into a shipping class, what a revision date does and does not prove, and how to read an IFRA certificate under the current 51st Amendment. If you want the checklist of documents to request before you buy, that is our guide to which safety documents to request before buying a fragrance oil. If you want the history of the format, read MSDS vs SDS. Here we go line by line.
First, which rules shaped the sheet in front of you
An SDS for a substance or mixture exists because of Article 31 of REACH, and its content follows Annex II. The supplier must provide one, free of charge and no later than the first delivery, for anything classified as hazardous under CLP. For a mixture that is not classified, Article 31(3) only requires one on request, and only if it contains certain hazardous substances above set levels (1% for most health or environmental hazards, 0.1% for skin sensitisers and some others). So a shea butter or a carrier oil that arrives with a technical data sheet and no SDS is not automatically a red flag. A fragrance oil that arrives without one almost always is.
The EU and Great Britain now use slightly different versions of Annex II. In the EU, Regulation (EU) 2020/878 rewrote it from 1 January 2021, with old format sheets allowed until 31 December 2022. It added fields for nanoforms, endocrine disrupting properties, specific concentration limits, M factors and acute toxicity estimates, and a place for a UFI where one is shown. Great Britain kept the earlier Annex II text, so a GB sheet has no UFI field and must be in English. An EU format sheet usually contains everything the GB annex asks for, but the regulatory references in section 15 and the emergency number still need to suit GB. The HSE enforces the SDS rules in Great Britain; Defra leads on UK REACH policy.
None of this applies to your finished cosmetic, which is outside the REACH SDS duty. Our guide to whether cosmetics need an SDS covers that side. The sheets in this article are the ones that come with your raw materials.
Section 1: two lines most people skip
The product identifier and code. Check it against the label on the drum or bottle, character by character. Suppliers often sell several versions of a scent under similar names, and an SDS for "Fig & Cedar" is no use if your bottle says "Fig & Cedar II".
1.2, identified uses and uses advised against. This is where a supplier tells you what the material is meant for. "Candles, wax melts, reed diffusers" with no mention of cosmetics, or an explicit "not for cosmetic use", means the supplier has not supported cosmetic use. It doesn't always mean the material is unsafe on skin. It does mean you cannot assume otherwise, and your assessor will want the full IFRA certificate and allergen data before going further.
On an EU sheet you may also see a UFI in section 1.1. That is a poison centre code for hazardous mixtures. It has nothing to do with whether the material can go into a cosmetic.
Section 2: reading the hazard codes like an assessor
Section 2 gives the classification of the material as supplied, the pictograms, the signal word ("Danger" or "Warning") and the hazard (H) and precautionary (P) statements. Read the H codes, because they summarise the classification. These are the ones makers meet most often.
| Code on the SDS | What it means | What it means for you |
|---|---|---|
| H317 | May cause an allergic skin reaction (skin sensitiser) | Expected on almost every fragrance oil and many essential oils. Gloves when handling the neat oil, and your assessor will look closely at the allergen statement. |
| H315 / H319 | Causes skin irritation / causes serious eye irritation | Common on essential oils, surfactants and acids. Handling precautions for the neat material; the finished product is judged at its own dilution in the CPSR. |
| H304 | May be fatal if swallowed and enters airways (aspiration hazard) | Typical of terpene rich oils such as citrus. It matters for how the raw material is stored and labelled, and for any CLP labelled product you make with it, such as a reed diffuser. |
| H225 / H226 | Highly flammable / flammable liquid and vapour | Look at section 9 for the flash point. Storage, workshop ventilation and shipping all follow from it. |
| H410 / H411 / H412 | Toxic to aquatic life with long lasting effects (H410 very toxic, H412 harmful) | Drives the environmental classification of candles, melts and diffusers made with the oil, and can make the raw material dangerous goods for transport (often UN3082). |
| H302 | Harmful if swallowed | Keep the neat material away from food areas and children. Usually a non issue at cosmetic dilution, but the assessor notes it. |
| H341 / H351 / H361 | Suspected of causing genetic defects / cancer / damage to fertility or the unborn child | Stop and ask your assessor before you use it in a cosmetic. Some substances with these classifications are restricted or banned in cosmetics outright. |
| EUH208 | Contains (name). May produce an allergic reaction | The mixture is not classified as a sensitiser, but a named sensitiser is present at or above the elicitation limit in CLP Annex I Table 3.4.6 (0.1% for most skin sensitisers, 0.01% for the strongest, sub category 1A). |
Two points cause most of the confusion. First, these codes describe the neat raw material, not your finished product. A fragrance oil with H317 at 100% can be perfectly acceptable at 1% in a body lotion; that judgement belongs to the safety assessment, not the SDS. Second, the CLP label rules do not apply to finished cosmetics, which have their own labelling regime. They do apply to candles, wax melts and diffusers, which is why EUH208 and the aquatic codes on your fragrance SDS end up on a candle label. Our guide to TRAs for candles and wax melts covers that route.
A fragrance oil with "no classification"?
Most fragrance concentrates contain sensitising materials well above 0.1%, so an SDS that classifies a fragrance oil as not hazardous at all deserves a second look. Ask the supplier how the classification was worked out and compare it with section 3 and the allergen statement. If the three documents disagree, at least one of them is wrong.
Section 3: what the composition list does and does not tell you
Section 3 looks like an ingredient list. It isn't. For a classified mixture, Annex II requires the supplier to list the hazardous substances above set cut offs (in the EU text, Table 1.1 of Annex II), together with their classification and concentration. The usual cut offs are 1% for irritants and many other hazards, 0.1% for skin sensitisers and 0.01% for the strongest (sub category 1A) sensitisers. Anything below those levels, and anything not classified, can be left out.
That has a practical consequence. Cosmetic allergen labelling starts at 0.001% in a leave on product and 0.01% in a rinse off product. A sensitiser at 0.05% in your fragrance oil may never appear in section 3, yet at a high enough fragrance level it can still need naming on your label. Section 3 cannot replace an allergen statement with percentages. Our guide to the expanded EU allergen list explains which list applies where: the EU list under Regulation (EU) 2023/1545 applies to products placed on the EU market from 31 July 2026, while Great Britain still uses its original list.
Reading ranges. Suppliers may give exact percentages or ranges, such as "Linalool 10 to <25%". Annex II says that when a range is used and data on the mixture as a whole are missing, the hazards must be described for the highest concentration of each ingredient. Read the top of the range when you do any quick sum of your own. Your assessor will want the allergen statement's actual figure for the real calculation.
Identifiers. CAS and EC numbers let your assessor match each substance against the cosmetic annexes. A name without a number, or a trade name in place of a chemical name, slows that down. (CLP does allow an alternative chemical name in some confidentiality cases, which is one more reason the allergen statement matters.)
Section 9 and section 14: how a flash point becomes a shipping class
Section 9 lists physical and chemical properties: appearance, odour, density, solubility and, for liquids, the flash point. For makers, flash point is the number that matters. Under CLP, a liquid with a flash point from 23 °C to 60 °C is a Category 3 flammable liquid (H226); below 23 °C with an initial boiling point above 35 °C it is Category 2 (H225). For road transport, liquids with a flash point of 60 °C or below fall into dangerous goods class 3. A fragrance oil with a flash point of 78 °C is neither, and a perfume made with ethanol almost certainly is.
Density is the other useful line. It converts millilitres into grams when your recipe and the supplier's percentages do not use the same unit.
Section 14 then gives the transport classification: a UN number, proper shipping name, class and packing group, or a clear "not regulated". On cosmetic and home fragrance raw materials you will often see UN1266 (perfumery products), UN1169 (extracts, aromatic, liquid), UN1170 (ethanol or ethanol solution) or UN3082 (environmentally hazardous substance, liquid, n.o.s.). A UN3082 entry does not always mean special shipping for small packs: under the road and sea rules, environmentally hazardous liquids in single or inner packagings of 5 litres or less are generally exempt, but your carrier makes the final call. If a marketplace has flagged your product, our guide to clearing an Amazon hazmat review picks up from here.
Sections 11, 12, 15 and 16 in one paragraph each
Section 11, toxicological information. Acute toxicity, irritation, sensitisation and the longer term endpoints, ideally with real data or a clear statement of how the classification was reached. It is one of the starting points for the toxicological profile in Part A of your CPSR, although the assessor will go beyond it.
Section 12, ecological information. Aquatic toxicity, persistence and degradability. It explains the H410 to H412 codes in section 2 and matters most for home fragrance products that carry a CLP label.
Section 15, regulatory information. National and EU or GB rules relevant to the material, sometimes including whether a constituent is on the candidate list of substances of very high concern. An EU sheet used in Great Britain often still quotes only EU references here.
Section 16, other information. The revision date and what changed. REACH has no expiry date for an SDS. Instead, Article 31(9) requires the supplier to update it without delay when new hazard or risk management information appears, when an authorisation is granted or refused, or when a restriction is imposed, and to send the dated revision to everyone supplied in the previous 12 months. A sheet dated 2017 is therefore not automatically invalid, but classifications and the Annex II format have both changed since then, so ask whether there is a newer version.
The IFRA certificate, line by line
The IFRA certificate (often called a Certificate of Conformity) comes from the fragrance supplier, covers one fragrance mixture, and states the maximum concentration of that mixture in a finished product, for each product category, at which it complies with the IFRA Standards. IFRA is the fragrance industry's own self regulation, not law: the Cosmetics Regulation doesn't mention it. Safety assessors rely on it all the same, because it is the quickest evidence that the restricted fragrance materials inside the oil are within accepted limits. For background on how the Standards are set, see our guide to IFRA Standards and certificates.
The header. Product name and code (match them to the bottle, as with the SDS), the issuing company, the date and a signature, and a line such as "in compliance with the IFRA Standards up to and including the 51st Amendment". The 51st Amendment was notified on 30 June 2023. Its new and revised restrictions applied to new fragrance creations from 30 March 2024 and to existing ones from 30 October 2025; its prohibitions applied from 30 August 2023 and 30 July 2024 respectively. Those dates apply to the supply of fragrance mixtures, not to finished products already on shelves. As of November 2026 the IFRA Standards Library still lists the 51st as the latest Amendment, so a certificate issued under the 49th or earlier deserves a request for an update.
The category table. Since the 49th Amendment, IFRA uses twelve categories, several split into sub categories. Certificates show a maximum level for each. Older certificates built on the pre 2020 system used different category numbers, and copying a number from one system to the other is a reliable way to get the wrong limit.
| IFRA category (51st Amendment system) | Covers, for example | Common maker trap |
|---|---|---|
| 1: products applied to the lips | Lip balm, lipstick, lip gloss | Lip balm is Category 1, not 5A, even though it is a balm. |
| 2: products applied to the axillae | Deodorants and antiperspirants of all types | A natural deodorant cream is still Category 2. |
| 3: products applied to the face or body using fingertips | Eye products, facial make up, make up remover, face masks, facial wipes | Easy to miss: eye and facial make up are Category 3, not 5B. |
| 4: products related to fine fragrance | Eau de parfum, perfume oils and roll ons, solid perfume, fragrancing cream | The Category 4 figure is not a licence to use the same level in a body cream. |
| 5A / 5B / 5C / 5D | Body lotion (5A), face moisturiser (5B), hand cream (5C), baby creams, oils and talc (5D) | A face cream reads 5B, which is often lower than 5A. Baby products read 5D. |
| 6: products with oral and lip exposure | Toothpaste, mouthwash, breath sprays | Not lip balm: that is Category 1. |
| 7A / 7B | Rinse off hair products with hand contact (7A), leave on hair products (7B) | Shampoo is 7A; a leave in conditioner or hair oil is 7B. |
| 8: products with significant anogenital exposure | Intimate wipes, baby wipes, tampons | Often among the strictest rows. |
| 9: products with body and hand exposure, primarily rinse off | Bar soap, shower gel, bath products | Soap makers read 9, not 12. |
| 10A / 10B | Household care products (10A), household aerosol and spray products (10B) | Cleaning products, not cosmetics. |
| 11A / 11B | Intended skin contact with minimal transfer from an inert substrate (without / with possible UV exposure) | Scented textiles and similar articles. |
| 12: not intended for direct skin contact | Candles and other products with minimal or insignificant transfer to skin | The highest number on most certificates, and the one wrongly copied into skin products. |
Read the row for your product and only that row. Several things the certificate does not do: it does not consider the other fragrance or botanical ingredients in your formula, it does not apply the restrictions in the cosmetic annexes, and it does not tell you which allergens to name on the label. Those are the assessor's job, and the assessor can set a lower level than the IFRA figure.
One fragrance oil, read from top to bottom
Here is a hypothetical example, with made up but realistic figures. A maker wants to use a fig and cedar fragrance oil in two products: a solid perfume balm at 10% and a face balm at 2%.
SDS, section 1. The code matches the bottle. Identified uses: "fragrance for cosmetics, candles and home fragrance". Good.
Section 2. Skin sensitiser (H317), skin irritant (H315) and aquatic chronic category 2 (H411). Normal for a fragrance oil. Gloves on.
Section 3. Linalool 10 to <25%, coumarin 1 to <5%, a woody aroma chemical 5 to <10%. For a quick sense check she reads the top of each range.
Section 9. Flash point 78 °C: not a CLP flammable liquid and not class 3.
Section 14. UN3082, because of the aquatic classification. Her 100 ml bottles fall within the small packaging exemption, and the courier confirms it.
Section 16. Revised in 2026. Current.
IFRA certificate. Issued under the 51st Amendment. Category 4 maximum 12%; Category 5B maximum 0.9%. The solid perfume at 10% sits under the Category 4 limit. The face balm at 2% is more than twice the Category 5B limit, so she drops it to 0.8% before the formula goes to the assessor.
Allergen statement. Linalool 18% of the oil. In the solid perfume that is 1.8% of the product; in the face balm at 0.8% it is 0.144%. Both are far above the 0.001% leave on threshold, so linalool will be named on both labels, along with whichever other allergens cross the line.
The whole read takes about fifteen minutes. It caught a face balm that would have come back from the assessor with a capped fragrance level, and it did so before any labels were printed.
Try it on your own shelf
Pick the fragrance you use most. Can you find, without help, the uses advised against, the highest H code, the flash point, the UN number or "not regulated", the Amendment number and the IFRA row for each product you make with it? Any blank is a question for your supplier.
What to forward to your assessor, and what to keep
Send everything, unedited: the SDS, the IFRA certificate, the allergen statement with percentages, and the specification and certificate of analysis. The specification says what the material should be and the limits it should meet; the certificate of analysis reports what a particular batch measured, so keep it matched to the lot number in your batch records. For essential oils, a batch certificate of analysis with a gas chromatography breakdown is worth asking for, because natural oils vary from harvest to harvest. Our CPSR preparation checklist sets out the full submission pack, and if a supplier simply will not provide an SDS, our guide on where to get an SDS for a small batch product covers the options.
Perfume oils deserve a mention of their own, because their high fragrance levels push every number above to its limit. Our guide to the perfume oil CPSR explains how assessors handle them.
Paperwork that doesn't add up?
Send us the SDS, the IFRA certificate and the allergen statement for any raw material, plus what you plan to make with it. We will read them with you, flag anything inconsistent, and tell you what your safety assessor will need before the CPSR can be signed.
Related reading
- Which safety documents to request before buying a fragrance oil
- MSDS vs SDS: what changed and what UK sellers need
- Do cosmetics need an SDS?
- IFRA Standards and certificates explained
- Fragrance allergen labelling: the expanded EU list
- How to prepare for a CPSR: the document checklist
- The toxicological profile in a CPSR (Part A, section 8)
- Amazon hazmat review: why your listing was flagged
- All regulatory compliance articles
Myths we hear
- An SDS shows the full composition. Section 3 lists only hazardous substances above set cut offs. Low level allergens and non classified ingredients can be left out.
- H317 means I can't use this oil in skincare. It describes the neat material. Use in a cosmetic depends on the level, the product type and the safety assessment.
- An SDS older than three years is invalid. REACH sets no expiry date. It must be updated when hazard information changes, so an old date is a reason to ask, not proof it is wrong.
- Any category figure on the IFRA certificate will do. Only your product's row applies, and the assessor can set a lower level still.
- UN3082 means I must ship as dangerous goods. Small single or inner packagings of environmentally hazardous liquids (5 litres or less) are generally exempt by road and sea. Your carrier decides.
What to do this week
- Pull the SDS for your three most used fragrance or essential oils and read section 1.2 on each.
- Write down the highest H code, the flash point and the section 14 entry for each one.
- Check every IFRA certificate names your exact product code and states the 51st Amendment, and request updates for any that don't.
- Mark the IFRA row for each product you make with that oil, and compare it with your actual use level.
- Check each allergen statement gives percentages, then send the full set to your assessor unedited.
Frequently asked questions
How do I read a safety data sheet quickly?
Read it by question. Section 1 for the product code and uses advised against, section 2 for the hazard codes, section 3 for hazardous ingredients and their ranges, section 9 for the flash point, section 14 for the UN number and section 16 for the revision date.
What does H317 mean on an SDS?
H317 means the material may cause an allergic skin reaction, so it is classified as a skin sensitiser. It is normal on fragrance oils and many essential oils. It describes the neat material; whether it is safe at your use level is decided in the CPSR.
What does EUH208 mean?
EUH208 reads 'Contains (name). May produce an allergic reaction'. It appears when a mixture is not classified as a sensitiser but contains a named sensitiser at or above the CLP elicitation limit, which is 0.1% for most skin sensitisers and 0.01% for sub category 1A.
Why is an allergen missing from section 3 of my SDS?
Section 3 only has to list hazardous substances above set cut offs, usually 0.1% for skin sensitisers. Cosmetic allergen labelling starts at 0.001% in leave on products, so you need the supplier's allergen statement with percentages.
What flash point makes a fragrance oil flammable?
Under CLP, a liquid with a flash point from 23 °C to 60 °C is a Category 3 flammable liquid (H226), and below 23 °C it is Category 1 or 2. For road transport, liquids with a flash point of 60 °C or below are dangerous goods class 3.
Does a safety data sheet expire?
No. REACH sets no expiry date. Article 31(9) requires the supplier to update it without delay when new hazard or risk management information appears, or when an authorisation or restriction applies, and to send the revision to recent customers.
Which IFRA Amendment should my certificate show?
The 51st, which was notified in June 2023 and was still the latest in November 2026. Its restrictions applied to existing fragrance creations from 30 October 2025. A certificate issued under an older Amendment should be updated.
Which IFRA category is my product?
Lip balm is 1, deodorant 2, eye and facial make up 3, perfume oils and solid perfume 4, body lotion 5A, face cream 5B, hand cream 5C, shampoo 7A, leave on hair products 7B, soap and shower gel 9, candles 12.
Official sources and legislation
- UK REACH, Article 31: requirements for safety data sheets (legislation.gov.uk)
- UK REACH, Annex II: requirements for the compilation of safety data sheets, GB text (legislation.gov.uk)
- Commission Regulation (EU) 2020/878 amending REACH Annex II (EUR-Lex)
- CLP Regulation (EC) No 1272/2008, GB text (legislation.gov.uk)
- CLP Regulation, Annex II: supplemental label elements including EUH208 (legislation.gov.uk)
- HSE: Safety Data Sheets
- IFRA Standards Library
- IFRA press release on the 51st Amendment and its implementation dates
- Commission Regulation (EU) 2023/1545 on fragrance allergen labelling (EUR-Lex)
- GB Cosmetics Regulation (EC) No 1223/2009 (legislation.gov.uk)
- Cosmetic Products Enforcement Regulations 2013 (SI 2013/1478)
Join the conversation