Doorgaan naar inhoud
Qualified safety assessorsUK · EU · USA
Get a quote
  1. Home
  2. BLOGS
  3. Nanomaterials in Cosmetics: Mineral Sunscreens, Pigments, the Nano Label and the Six Month Notification, Explained for Makers

Nanomaterials in Cosmetics: Mineral Sunscreens, Pigments, the Nano Label and the Six Month Notification, Explained for Makers

Zinc oxide, titanium dioxide, carbon black, silica and hydroxyapatite: how to tell whether an ingredient is nano, which route it takes, and what your assessor needs from the supplier

S Syed Muhammad Shamuel SheesFounder & Lead Compliance Consultant
15 min read
Reviewed by Phoenix Cosmetic Safety · Nov 10, 2026
Sunscreen cream on fabric, illustrating nanomaterials in cosmetics labelling, notification and safety assessment

The short answer

Under Article 2(1)(k) of Regulation 1223/2009, a nanomaterial is an insoluble or biopersistent, intentionally manufactured material with one or more external dimensions, or an internal structure, between 1 and 100 nm. A nano form is only allowed where the annexes name it: nano titanium dioxide, zinc oxide and three other UV filters, carbon black (nano) as a colourant and, in the EU only, nano hydroxyapatite in toothpaste and mouthwash. Listed nano filters and colourants used within their conditions take the ordinary notification. Other nanomaterials need a separate Article 16 notification at least six months before launch, through CPNP in the EU or SCPN in Great Britain. Every nano ingredient is labelled with (nano) after its name, and the safety assessor needs the supplier's particle data.

Key takeaways

  • Nano is a legal status set by Article 2(1)(k): size of 1 to 100 nm, insoluble or biopersistent, and made that way on purpose. The supplier's number based particle size distribution answers the question.
  • An annex entry for an ingredient does not cover its nano form unless the nano form is named. Titanium dioxide is listed in nano form only as a UV filter, and carbon black is the only nano colourant.
  • Listed nano UV filters and colourants used within their conditions take the ordinary CPNP or SCPN notification; other nanomaterials need an Article 16 notification at least six months before launch.
  • Unlisted nano colourants, UV filters and preservatives cannot be used at all, and Article 16 is not a way round that.
  • Every nano ingredient carries (nano) after its name in the ingredient list, whatever the level, and a non nano claim needs the supplier's particle data in your PIF.
  • The EU banned several metal nanomaterials and restricted nano hydroxyapatite in 2024; Great Britain has not, so dual market products can take different routes.
  • Omnibus VI would keep the EU nano notification but drop the six month lead time; it was not yet in force on 10 November 2026.

Here is a conversation we have more often than you would think. A maker sends over her mineral day cream for a safety report. The zinc oxide came from a reseller who described it as "non nano, 100% natural", and the jar says so in large letters. We ask for the particle size distribution, and the reseller forwards the manufacturer's sheet. The median particle size, by number, is 35 nanometres. It is a perfectly good coated UV filter grade, permitted in the EU and Great Britain. It is also nano, the ingredient list is missing the word that has to follow it, and the front of the jar says the opposite of the truth.

That is the typical nano problem for a small brand. Nobody is building particles in a clean room. The nano material arrives in a bag from a supplier, often with a vague description, and the legal consequences follow from a number on a specification sheet that nobody asked for.

This guide covers what the law actually requires. The rules sit in Regulation (EC) No 1223/2009 in the EU, and in the same regulation as retained in Great Britain, enforced by Trading Standards under the Cosmetic Products Enforcement Regulations 2013. Four provisions do most of the work: the definition in Article 2(1)(k), the annexes that list which nano forms are allowed, the separate notification in Article 16, and the labelling rule in Article 19(1)(g). We will take them in the order you meet them when you formulate.

What counts as a nanomaterial in cosmetics law

Article 2(1)(k) defines a nanomaterial as "an insoluble or biopersistent and intentionally manufactured material with one or more external dimensions, or an internal structure, on the scale from 1 to 100 nm." Three tests, and a material has to pass all of them:

  • Size. At least one external dimension, or an internal structure, between 1 and 100 nm.
  • Insoluble or biopersistent. Something that dissolves into molecules in the product or on the skin is not caught. Be careful with "partly soluble", though. The SCCS points out that a material which only dissolves slowly can still behave as particles for long enough to matter, and should not be waved through as soluble.
  • Intentionally manufactured. The material was made at that scale on purpose, as a coated UV filter grade is.

The definition does not say what share of the particles has to be under 100 nm, and real powders always have a spread of sizes. The Commission's questions and answers on nanomaterial notification suggest that responsible persons can use the threshold in Commission Recommendation 2022/C 229/01: a material counts as nano if 50% or more of its particles, by number, fall in the 1 to 100 nm range. That recommendation is guidance across EU law and has not been written into the cosmetics definition. The cosmetics wording is unchanged in both the EU and Great Britain as of November 2026. In practice the 50% by number test is the one most suppliers and assessors now use.

The Commission is also clear about who decides: it is up to the responsible person to conclude whether a substance is a nanomaterial, and the place to get the facts is the supplier. That means a written statement and a particle size distribution measured by number, not a line on a product listing.

Three questions to send your supplier

Is this grade a nanomaterial under Article 2(1)(k) of Regulation 1223/2009? Can you send the number based particle size distribution and the method used? If it is a UV filter or colourant, which annex entry does this grade comply with, including the coating? A supplier who answers all three in writing has saved you weeks.

Nano is allowed by name, not by default

This is the point that catches people out. The preamble to the annexes says that substances listed in Annexes III to VI do not cover nanomaterials unless the nano form is specifically mentioned. So the fact that zinc oxide is an approved UV filter tells you nothing about nano zinc oxide. The nano form needs its own entry, and it comes with its own conditions on purity, particle size, coating and use.

The list of named nano forms is short. Here it is, with the position in each market.

Ingredient (nano form)Where it is listedMain conditionsGB position
Titanium Dioxide (nano)Annex VI entry 27a (UV filter)Up to 25% (bulk and nano combined); purity at least 99%, rutile form, median particle size at least 30 nm, only the listed coatings; photocatalytic activity limit; not in applications that may lead to inhalationSame entry
Zinc Oxide (nano)Annex VI entry 30a (UV filter)Up to 25% (bulk and nano combined); wurtzite structure, particle size and coating conditions; not in applications that may lead to inhalationSame entry
Methylene Bis-Benzotriazolyl Tetramethylbutylphenol (nano)Annex VI entry 23a (UV filter)Up to 10%; uncoated; particle size conditions; not in applications that may lead to inhalationSame entry
Tris-Biphenyl Triazine (nano)Annex VI entry 29 (UV filter)Up to 10%; median primary particle size above 80 nm; uncoated; not to be used in spraysSame entry
Bis-(Diethylaminohydroxybenzoyl Benzoyl) Piperazine (nano), known as HAA299Annex VI entry 34 (UV filter)Up to 10% (with the non nano form); particle size condition; not in applications that may lead to inhalationListed in GB since 2023
Carbon Black (nano), CI 77266Annex IV entry 126a (colourant)Up to 10%; purity and primary particle size conditions; not in applications that may lead to inhalationSame entry
Hydroxyapatite (nano)EU Annex III entry 372, added by Regulation (EU) 2024/858Toothpaste up to 10%, mouthwash up to 0.465%; rod shaped, uncoated particles only; not in applications that may lead to inhalationNo GB annex entry; goes through the Article 16 notification
Copper, colloidal silver, gold, platinum and styrene/acrylates copolymer (nano forms)EU Annex II entries 1725 to 1729 (prohibited)Banned in the EU: not placed on the market from 1 February 2025, not made available from 1 November 2025Not banned in GB; Article 16 notification applies and OPSS has asked for safety data

Two things follow from that table. First, titanium dioxide is only listed in nano form as a UV filter. There is no nano entry for it as a colourant, so a nano grade used as a white pigment in a foundation is not allowed, even though bulk titanium dioxide (CI 77891) is a routine colourant. Carbon black is the only colourant listed in nano form. Second, the EU and GB lists have started to drift apart. In 2024 the EU banned a group of metal and polymer nanomaterials and restricted nano hydroxyapatite to toothpaste and mouthwash through Regulation (EU) 2024/858. Great Britain has not made the equivalent amendments, although OPSS ran a call for data on exactly those materials, plus nano silica, and could act on it.

Before you rely on the table, check the current entry for your market in CosIng for the EU and in the GB version of the regulation on legislation.gov.uk. Our guides to UV filters and Annex VI and to colourants and Annex IV cover the non nano entries.

Three routes, and one dead end

Once you know whether a material is nano and what it does in your formula, the regulatory route is mechanical. Article 16 does not apply to nano colourants, UV filters and preservatives that are regulated through the annexes, and the Commission's guidance adds that it does not apply to nanomaterials that meet an Annex III restriction either. Everything else that is nano goes through Article 16, unless it is banned outright.

Your situationRouteWhat you do
A nano colourant, UV filter or preservative listed in nano form, used for that job and within its conditions (for example nano zinc oxide as a sunscreen filter)Annex routeOrdinary notification in CPNP or SCPN, declaring the nanomaterial, its chemical name and the exposure conditions. No separate Article 16 notification. (nano) on the label.
A nanomaterial whose job in the formula is not colouring, UV filtering or preserving, and which is not banned or restricted (for example nano silica used for texture)Article 16 routeSeparate nanomaterial notification with the full data set at least six months before the product goes on sale, then the ordinary notification. (nano) on the label.
A nano colourant, UV filter or preservative that is not listed in nano form (for example nano titanium dioxide used as a white pigment)No routeIt cannot be used. Article 16 is not a back door for these; the only way in is an SCCS opinion and an annex amendment.
A nanomaterial in Annex II for your market (for example nano gold in an EU serum)No routeProhibited. Reformulate.

The third row is the one to remember. Makers sometimes assume that the six month notification is a way to use any nano ingredient as long as you wait. It is not. The Commission's guidance says plainly that nano colourants, preservatives and UV filters without an authorisation must not be notified under Article 16 and cannot legally be used.

The Article 16 notification

For a product on the Article 16 route, the responsible person submits a separate nanomaterial notification electronically, in addition to the normal product notification. In the EU it goes to the Commission through the nano section of CPNP. In Great Britain it goes to the Secretary of State through SCPN under the GB text of Article 16. Either way it has to be made at least six months before the product is placed on the market, and it must include:

  • the identification of the nanomaterial, including its IUPAC chemical name and the other descriptors set out in the preamble to the annexes;
  • its specification, including particle size and physical and chemical properties;
  • an estimate of the quantity you expect to place on the market each year;
  • its toxicological profile;
  • safety data relating to the category of product it will be used in;
  • the reasonably foreseeable exposure conditions.

The SCPN guidance on nanomaterials asks for a little more in practice, including the droplet size and distribution when a product is sprayed and whether the material reacts or changes its properties under certain conditions, such as photocatalytic activity. It also confirms the timing: a product containing a nanomaterial first notified in GB after 1 January 2021 can be placed on the market six months after that notification.

The six months are not an approval process. If the Commission or OPSS has concerns, it can ask its scientific advisers for an opinion and then restrict or ban the material, but if nothing happens the product can go on sale when the period ends. A responsible person can delegate the submission to someone else by written mandate, and many small brands do, but the responsibility stays with the responsible person.

Plan the calendar

If a product needs an Article 16 notification, the clock starts when the full data set is submitted, not when you first email your supplier. Add the time it takes to get a complete toxicological profile out of the supplier, and a nano texture powder can push a launch back by most of a year.

The (nano) label

Article 19(1)(g) requires every ingredient present in the form of a nanomaterial to be clearly indicated in the list of ingredients, with the name followed by the word nano in brackets: Zinc Oxide (nano), Titanium Dioxide (nano), CI 77266 (nano). It applies whatever the concentration and whichever route the ingredient took, annex listed or Article 16. OPSS repeats the same rule in its guidance for Great Britain.

The suffix is easy to check from the outside. A market surveillance officer who sees a mineral sunscreen with Zinc Oxide and no (nano) only has to ask for your supplier documents. If they show a nano grade, the label is non compliant. Our guide to the ingredient list covers the rest of the INCI rules.

How the safety assessor handles a nano ingredient

Small particles can behave differently from the bulk material. They have far more surface area, they can be more reactive, and they behave differently in the lungs if inhaled. So the assessor cannot reuse data for the bulk form. The SCCS sets out what a full nano dossier covers in its Guidance on the safety assessment of nanomaterials in cosmetics (2nd revision, SCCS/1655/23): physical and chemical characterisation, exposure, hazard and risk assessment. It is written for people preparing dossiers for the SCCS, but assessors use it as the checklist for what a nano ingredient's file should contain.

For your CPSR that translates into a short list of documents to request from the supplier:

  • the particle size distribution by number, with the method;
  • shape, crystal form and aggregation or agglomeration state;
  • the coating or surface treatment, and its percentage;
  • solubility, and dissolution rate if it is partly soluble;
  • for UV filters and colourants, a statement that the grade meets each condition in the annex entry;
  • for anything on the Article 16 route, the toxicological data that went into the notification.

These feed the ingredient's entry in Part A, section 8, which our post on the toxicological profile in a CPSR explains. Where the nano form is annex listed and used within its conditions, the assessor can rely on the SCCS opinion behind the entry, but still checks that your grade and your use fit those conditions. Format matters as much as formula here. The condition "not to be used in applications that may lead to exposure of the end user's lungs by inhalation" rules out propellant and pump sprays for the nano filters and carbon black (nano), and loose powders need a careful look. Tris-biphenyl triazine (nano) is simply not allowed in sprays.

Mineral sunscreens in two paragraphs

Most small brand interest in nano comes from mineral SPF, and the nano rules are only the first hurdle. A coated nano zinc oxide or titanium dioxide grade that meets its Annex VI entry, in a lotion, cream or stick, takes the annex route: ordinary notification declaring the nanomaterial, (nano) on the label, and an assessor who has the grade specification. The same grade in a spray is out.

After that, the sunscreen rules take over. The SPF and UVA protection have to be measured by a laboratory, the label has to follow the Commission's recommendation on sunscreen efficacy, and the CPSR has to look at the whole product at sunscreen exposure levels. None of that can be estimated from the filter percentage. Our guide to SPF claims, testing and sunscreen labelling covers it in detail, including a worked nano zinc example, so we won't repeat it here.

Worked examples beyond sunscreen

A remineralising toothpaste with nano hydroxyapatite. In the EU this is an Annex III ingredient. If the toothpaste contains no more than 10% of a rod shaped, uncoated grade meeting the particle specification in entry 372, it complies with the restriction, takes the ordinary notification, and lists Hydroxyapatite (nano). A mouthwash version has to stay at or below 0.465%. In Great Britain there is no annex entry, so the same material counts as a nanomaterial used for a purpose other than as a colourant, preservative or UV filter. That puts it on the Article 16 route through SCPN, six months ahead of launch, with the full data set. One formula, two different paperwork paths, which is exactly the kind of thing a dual market CPSR has to pick up.

A mattifying primer with silica (nano). Several silica grades are nano. They are not colourants, preservatives or UV filters and are not listed or banned, so in both markets a product using them goes through Article 16. In October 2025 the Commission asked the SCCS for a fresh opinion on hydrated silica, pyrogenic silica, silica silylate and silica dimethyl silylate in nano form, so expect this area to move. Many brands switch to a non nano grade simply to avoid the six month wait.

A "24 carat gold" serum with colloidal gold. In the EU, gold (nano) and colloidal gold (nano) have been in Annex II since Regulation (EU) 2024/858. Products containing them could not be placed on the EU market from 1 February 2025, and from 1 November 2025 they cannot be sold at all. In Great Britain the same ingredient is not banned, but it is a non listed nanomaterial, so the product needs an Article 16 notification and an assessor willing to conclude it is safe on the available data. That is a hard conclusion to reach, which is why most of these products are being reformulated. Our page on Annex II prohibited substances explains how bans and transition dates work.

Non nano claims, liposomes and "nano" marketing

"Non nano zinc oxide" is a legitimate claim when it is true. The evidence is the supplier's particle size distribution showing the grade falls outside the definition, and that document belongs in your Product Information File, because it is also your justification for leaving (nano) off the label. A reseller's listing is not evidence. If you print "non nano" on the front of the pack, the claim has to meet the common criteria for cosmetic claims, including evidential support, like any other. Bear in mind that non nano filters tend to leave more white cast, and that switching grade changes nothing about SPF testing.

The opposite confusion is ingredients sold as "nano" for marketing reasons. Liposomes, nanoemulsions and many "nano delivery systems" are usually soft structures that break down into their components, so they generally fall outside the insoluble or biopersistent part of the definition. Usually is not always. The assessor should confirm it from the supplier's data, not from the brochure, and where a supplier cannot say whether a material is nano, don't use it until they can.

Ask yourself

Does anything in your range come with the words nano, micronised, ultrafine, transparent mineral or colloidal on the supplier's paperwork? Each of those is a prompt to ask for the particle size distribution before the next batch.

What is changing, and what is not

The definition. Still the 2009 wording in both markets. The EU has talked about aligning it with the 2022 Recommendation for years, but no amendment has been adopted. Use the 50% by number test as good practice and keep the supplier's data on file.

The six months in the EU. The EU's chemicals simplification package, known as Omnibus VI, originally proposed scrapping the separate nano notification altogether. Parliament and Council refused, and the text Parliament adopted on 22 October 2026 keeps it: products containing nanomaterials must still be notified to the Commission, with the nanomaterial's identity and specification, before they are placed on the market. Reports of the agreed text indicate the fixed six month lead time would go. As of 10 November 2026 the Council has not formally adopted it and nothing has been published in the Official Journal, so the six month rule still applies today. If you are planning a 2027 EU launch with a nano ingredient on the Article 16 route, plan for six months and treat any shortening as a bonus.

Great Britain. Omnibus VI does not apply. GB keeps its own Article 16, the six months and SCPN, and makes its own annex changes on the advice of the Scientific Advisory Group on Chemical Safety. Northern Ireland follows EU cosmetics law under the Windsor Framework, so a product sold there is notified through CPNP and follows the EU annexes, including the 2024 nano bans.

Not sure whether your ingredient is nano?

Send us the supplier specification, the INCI list and a photo of the pack. We will tell you whether the material is a nanomaterial under cosmetics law, which route it takes in Great Britain and the EU, what the label must say, and what the assessor needs before your CPSR can be signed.

Book a consultation Order a CPSR

Related reading

Myths we hear

  • Nano ingredients are banned in cosmetics. A handful are named and allowed with strict conditions, others can be used after an Article 16 notification, and some are banned. It depends on the material and the market.
  • If the bulk ingredient is permitted, the nano form is too. The annexes do not cover nano forms unless the nano form is specifically named, with its own conditions.
  • The six month notification lets you use any nano ingredient. Not for colourants, UV filters or preservatives. If the nano form is not listed, it cannot be used, notification or not.
  • Non nano on the reseller's listing is enough to leave (nano) off the label. Only the supplier's particle size data is evidence, and it belongs in the PIF.
  • Anything marketed as nano is a nanomaterial. Liposomes and nanoemulsions usually break down and fall outside the definition, but the assessor confirms it from data.

What to do this week

  1. List every mineral UV filter, pigment, silica and texture powder in your range, plus anything described as nano, micronised, ultrafine or colloidal.
  2. Email each supplier for a written nano statement and the number based particle size distribution.
  3. Check each nano grade against its annex entry for your market, including coating, particle size and the inhalation condition.
  4. Sort each product into the annex route, the Article 16 route or the reformulate pile, separately for GB and the EU.
  5. Correct any ingredient list missing (nano), and file the evidence behind any non nano claim in the PIF.

Frequently asked questions

What is a nanomaterial in cosmetics law?

Article 2(1)(k) of Regulation 1223/2009 defines it as an insoluble or biopersistent, intentionally manufactured material with one or more external dimensions, or an internal structure, between 1 and 100 nm. Whether your ingredient qualifies is answered by the supplier's particle size data.

What percentage of particles must be under 100 nm for an ingredient to count as nano?

The cosmetics definition sets no threshold. The Commission suggests using the 50% by number test from Recommendation 2022/C 229/01, which most suppliers and assessors now apply, but that recommendation has not been written into cosmetics law.

Which nanomaterials are allowed in cosmetics?

Only nano forms named in the annexes: titanium dioxide, zinc oxide, MBBT, tris-biphenyl triazine and HAA299 as UV filters, carbon black (nano) as a colourant and, in the EU, hydroxyapatite (nano) in toothpaste and mouthwash. Other nanomaterials used for non colourant, UV filter or preservative purposes need an Article 16 notification.

When do I need the six month nanomaterial notification?

When a product contains a nanomaterial that is not a listed colourant, UV filter or preservative used within its annex conditions, and does not meet an Annex III restriction. It goes through CPNP in the EU or SCPN in Great Britain at least six months before launch, in addition to the ordinary notification.

How do I label a nano ingredient?

Put the word nano in brackets after the ingredient name in the ingredient list, for example Zinc Oxide (nano). Article 19(1)(g) requires this for every ingredient present as a nanomaterial, whatever the concentration.

How do I prove my zinc oxide is non nano?

Get the supplier's number based particle size distribution showing the grade falls outside the definition, and keep it in your Product Information File. A reseller's description is not evidence, for the label or for a non nano claim.

Can I use nano zinc oxide or titanium dioxide in a spray?

No, in practice. Their Annex VI entries prohibit applications that may lead to exposure of the user's lungs by inhalation, which rules out propellant and pump sprays. Powders need a careful assessment, and tris-biphenyl triazine (nano) is barred from sprays outright.

Is the EU dropping the six month nano notification?

Not yet. The Omnibus VI text Parliament adopted on 22 October 2026 keeps a nano notification before the product is placed on the market, and reports indicate the six month lead time would go. It still needs Council adoption and publication, so six months applies for now. Great Britain is not affected.

Official sources and legislation

S
Written by

Syed Muhammad Shamuel Shees

Founder & Lead Compliance Consultant

Phoenix Safety Consultants is a cosmetic compliance consultancy with offices in London, Tallinn and Pensacola. Our safety assessors and toxicologists prepare CPSRs, Toxicological Risk Assessments, PIFs, SDSs and UK/EU notifications for brands of every size. Talk to the team on WhatsApp or at compliance@phoenixcosmeticsafety.com.

Join the conversation