Doorgaan naar inhoud
Qualified safety assessorsUK · EU · USA
Get a quote
  1. Home
  2. BLOGS
  3. GMP for Small Cosmetic Makers: ISO 22716 in Plain English, Batch Records and the PIF Statement

GMP for Small Cosmetic Makers: ISO 22716 in Plain English, Batch Records and the PIF Statement

You do not need a factory or a certificate. You need a clean, separate space, a written method, and a batch record for every pot you pour. Here is what ISO 22716 looks like at studio scale.

S Syed Muhammad Shamuel SheesFounder & Lead Compliance Consultant
Updated Nov 8, 2026 10 min read
Reviewed by Phoenix Cosmetic Safety · Oct 30, 2026
Clean cosmetic bottling line, illustrating GMP and ISO 22716 for small cosmetic makers

The short answer

Article 8 of Regulation (EC) No 1223/2009 says every cosmetic must be made under good manufacturing practice (GMP), and the same rule applies in Great Britain. If you follow ISO 22716, the law presumes you comply: it is the harmonised standard in the EU and the designated standard in GB. You do not have to be certified. What you do need is a documented way of working that suits your size, a batch record for every batch, and a description of your manufacturing method with a GMP statement in your Product Information File.

Key takeaways

  • GMP applies to every maker, from a contract factory to a sole trader with a spare room. The standard scales; the duty does not go away.
  • Following ISO 22716 gives you a presumption of conformity with Article 8 in the EU and in Great Britain.
  • Certification is voluntary. The PIF needs a description of how the product is made and a statement that it was made under GMP.
  • For a small maker, the batch record does most of the work: it ties every jar you sell to a formula version, raw material lots and checks.
  • Change control is where GMP meets your safety report. Swap a supplier or tweak a percentage without telling your assessor and the CPSR may no longer describe your product.
  • If someone else makes your product, you still need their GMP statement, a description of their method and access to their batch records.

Most small makers we work with are better at manufacturing than they think and worse at proving it. The soap is good, the workspace is clean, and the recipe lives in the maker's head. Then a customer reports a rash, or a Trading Standards officer asks for the Product Information File, and there is nothing to show which oils went into which batch.

That gap is what good manufacturing practice, GMP, is about. It is not a factory standard you can ignore at studio scale. Article 8 of Regulation (EC) No 1223/2009 says the manufacture of cosmetic products shall comply with GMP, and the GB version of the Regulation, enforced through the Cosmetic Products Enforcement Regulations 2013, says the same. This guide translates ISO 22716 into what a one- or two-person business actually does, and what has to end up in the PIF.

What GMP is, and what it is not

GMP is a way of making products so that every batch matches the formula your safety assessor signed off, is made hygienically, and can be traced if something goes wrong. It is not a licence. Nobody inspects you before you start, and there is no GMP register to join. If the formula itself needs work before you scale up, our formulation services can help.

The law presumes you comply if you follow the relevant standard. In the EU, Article 8(2) points to harmonised standards, and the Commission's list of harmonised standards for cosmetics has exactly one: EN ISO 22716:2007, Cosmetics, Good Manufacturing Practices. In Great Britain, the amended Article 8 refers to designated standards instead, and the government's designated standards notice for cosmetics names the same ISO 22716. One standard, both markets.

ISO 22716 is written as guidelines. It tells you what has to be controlled, not which equipment to buy. That is why a sole trader with a dedicated room can meet it with short procedures and careful records, while a contract factory meets it with validated systems. The size of the paperwork changes. The questions it answers do not.

The fifteen areas of ISO 22716, at studio scale

The standard's main clauses cover fifteen areas. Written out, that sounds like a quality manual. For a small maker, most of them come down to a paragraph or a single shared page.

ISO 22716 areaWhat it looks like in a small studio
PersonnelYou and anyone who helps know the procedures, follow the hygiene rules and wear suitable clothing. Training is recorded, even if it is a signed sheet.
PremisesA defined, clean, dry space with cleanable surfaces, kept free of food prep, laundry and pets while you make product, with pest control and proper storage.
EquipmentPots, jugs, stick blenders and moulds kept for cosmetics only, cleaned to a written method, and scales checked against a known weight.
Raw materials and packagingBought from suppliers who send documents, checked on arrival, labelled with name, lot and date, stored correctly and used oldest first.
ProductionMade to a written method that matches the assessed formula, with weights and checks recorded in a batch record and a batch code on every unit.
Finished productsChecked against set criteria before release, such as appearance, odour, pH and fill weight, then stored properly. Keep a retained sample where you can.
Quality control laboratoryFor most makers this means the checks you can do in-house, plus outside testing where your assessor asks for it.
Out-of-specification productA written rule for what happens to a batch that fails a check: rework, quarantine or destroy, and who decides.
WastesSafe disposal, including of sodium hydroxide solution and solvent-soaked wipes.
SubcontractingA written agreement with any contract manufacturer, filler or lab, and copies of their documents.
DeviationsA note of anything that did not go to plan, what you decided and why.
Complaints and recallsA complaints log, a way of investigating, and a plan to trace and pull back a batch.
Change controlNo change to formula, supplier, method or packaging without recording it and checking its effect, including on the safety report.
Internal auditA recorded self-check against your own procedures, once a year at least.
DocumentationAll of the above written down, dated and kept.

Two of these take real, ongoing effort: the batch record and change control. They are also the two an assessor, an inspector and an insurer will ask about first.

The documents you actually need

  • Short written procedures. Hygiene, cleaning, receiving materials, making, checking and releasing product, and handling complaints and changes. A few pages in plain language is fine.
  • A raw material register. Each material, supplier, lot number, date received, expiry and where its SDS and specification are filed.
  • A batch record template. Filled in for every batch, without exception.
  • A cleaning log. Per session or per batch.
  • Training records. For you and anyone who helps.
  • Deviation, complaint and change control logs. Mostly empty is fine. Missing is not.
  • A recall plan. One page on how you would find the affected batches, contact customers and get stock back. Our recall and withdrawal guide covers the steps.
  • The manufacturing method and GMP statement for the PIF, covered below.

The batch record holds it all together

A batch record is the completed form for one batch. It captures the date and batch code, the formula version, each ingredient with its weight and supplier lot, the process details that matter, the checks and their results, how many units you filled and with which packaging lot, any deviations, and a signature.

Its job is simple to state. For any jar a customer holds, you can say which formula, which raw material lots, which day and which checks. A recall depends on that. So does an insurer's claim review, and so does an inspector's comparison between what your CPSR assessed and what you are actually making. The batch code printed on the pack, which our guide to batch codes and label details explains, is only useful if a record sits behind it.

A worked example: one Saturday of soap, with a record

Here is a cold process batch written up the way we like to see it. The numbers are illustrative.

  • Batch SB-2611-01, lavender bar, formula version 3 (the version in the CPSR).
  • Oils: olive oil 600 g, coconut oil 300 g, shea butter 100 g, each with its supplier lot. The shea is from a new supplier, so the entry points to change control record CC-07, where the assessor confirmed the new specification matched.
  • Lye solution: sodium hydroxide 140 g, lot recorded, in 330 g distilled water.
  • Fragrance: lavender essential oil 30 g, weighed rather than poured by eye, lot recorded.
  • Process: oils at 40°C, lye solution at 38°C, combined at 10:42, light trace at 10:51, essential oil added, poured into mould B at 10:55.
  • Next day: unmoulded and cut into 12 bars, cure started.
  • Release, week six: appearance and odour normal, pH checked and within the range the assessor set, bars weighed, labelled with the batch code, 12 units to stock. Signed.

Filling that in takes a few minutes spread across six weeks. If a customer reacts to a bar from SB-2611-01, the maker can name every lot, show the formula matched the assessment, show the new shea was cleared before use, and show the cure and release checks were done. The soap is no different. The business is much easier to defend. If you make soap, our guide to the CPSR for handmade soap covers the assessment side.

Deviations and change control

These two logs are what separate a GMP system from a tidy workshop.

The deviation log records anything that did not go to plan: a temperature overshoot, a lot that looked or smelled different, a batch that failed its pH check, a step done out of order. Each entry says what happened, what you decided, and whether the batch was released, reworked or destroyed.

The change control log records deliberate changes before they happen: a new supplier, a tweak to a percentage, a new jar, a different method. Each entry notes the likely effect and whether you asked your safety assessor. In the soap example, the new shea supplier was a change control entry before the batch was made, not an explanation written afterwards.

How GMP connects to your CPSR

A safety assessment assumes the product is made consistently, to the assessed formula, from materials that match the assessed specifications. Several sections of Annex I Part A depend on that. Section 3 covers microbiological quality, which relies on hygienic manufacture as much as on the preservative. Section 4 covers the purity of the substances used, which relies on your materials being what their specifications say.

Change control is where the two meet. A supplier swap recorded in your log should trigger a question to your assessor, and that question keeps the report valid. Our guide to keeping your CPSR current sets out when a change needs a review.

Making cosmetics at home or in a studio

No rule bans making cosmetics at home, and plenty of established brands started at a kitchen table. GMP still applies, and what an inspector or assessor looks for is control rather than square footage:

  • a space used only for cosmetics while you are making, with food prep, laundry and pets kept out
  • surfaces you can clean, and a sink for washing equipment
  • equipment kept for cosmetic use only
  • materials stored labelled and off the floor
  • the records described above

The findings we see most often are a kitchen used for food and cosmetics at the same time, materials decanted into unlabelled tubs, and no batch records at all. The HSE's COSHH guidance is also worth reading for how you store and handle hazardous materials such as sodium hydroxide. If you are moving from hobby to business, our guide to selling handmade cosmetics covers the wider picture, and our Trading Standards inspection guide explains what an officer asks for on the day.

A useful test: could a trained stranger walk into your space with your written method and make your product to the same standard? And could they tell from your records what you made last month? If both answers are yes, you are most of the way there.

Is ISO 22716 certification worth paying for?

Certification by an audit body is voluntary. It earns its cost when retailers, distributors or export markets ask for it, when you are choosing between contract manufacturers, or when the business has grown to the point where an outside audit keeps the system honest. For most small makers selling direct and through marketplaces, the money usually does more good spent on the CPSR, testing and a well-kept file. A certificate proves your practice to other people. The practice itself is what the law asks for.

When someone else makes your product

If a contract manufacturer makes your product, their GMP becomes your problem. The PIF still needs a description of the manufacturing method and a GMP statement, and both have to come from them. Batch records are not listed in the PIF itself, but you will need them for complaints, recalls and serious undesirable effect reports, so get access in writing. Put two clauses in the supply agreement: they share batch records on request, and they tell you before changing a formula, supplier or process. A manufacturer that will not agree to either leaves you exposed. Our guide to CPSRs for private label brands covers the contract side in more detail.

Writing the GMP statement for your PIF

Article 11(2)(c) asks for "a description of the method of manufacturing and a statement on compliance with good manufacturing practice referred to in Article 8". The Regulation does not set a format. A statement that works in practice:

  • says the product is manufactured in accordance with the principles of good manufacturing practice set out in EN ISO 22716:2007
  • names the manufacturing site
  • refers to your procedures by version and date
  • is dated and signed by the manufacturer, which may be you

Keep it next to the manufacturing method. It is a short document, and it is only as good as what sits behind it. An inspector who reads it will usually ask for the batch record for the batch in their hand. Our PIF template and checklist shows where both pieces go, and our PIF vs CPSR guide explains how the file and the safety report fit together.

A GMP starter checklist

  1. Define your making space and write the hygiene rules for it.
  2. Set aside equipment for cosmetics, write the cleaning method and check your scales.
  3. Start the raw material register and label every material with name, lot and date.
  4. Write the manufacturing method for each product, matching the assessed formula.
  5. Create a batch record template and use it every time.
  6. Decide your release checks and record them.
  7. Open the deviation, complaint and change control logs.
  8. Write the one-page recall plan.
  9. Sign the GMP statement and file it with the manufacturing method in the PIF.
  10. Audit yourself against this list at least once a year.

Phoenix can review your procedures and batch records as part of a 30-minute consultation, and our Product Information File service builds the manufacturing section around them. Next Saturday, make the same soap. Just write it down.

Related reading on the Phoenix blog

Myths we hear

  • GMP is for factories, not for people making balms at home. Article 8 covers all cosmetic manufacture. ISO 22716 is written as guidelines, so a one-person studio meets it with simpler procedures, but it still has to meet it.
  • I need an ISO 22716 certificate to sell. No law asks for one. You need to work to GMP and say so in the PIF. A certificate is something retailers or export buyers sometimes request.
  • My kitchen is spotless, so I am fine. Clean is the start. GMP also asks for separation from food and pets during production, controlled materials, written methods and records.
  • I know my recipe by heart, so I do not need to write it down. The record is the point. An inspector or assessor can only check what is written, and a recall depends on knowing what went into which batch.
  • Small batches do not need records. A batch of twelve bars that reaches twelve customers needs a record just as much as a batch of twelve thousand.

What to do this week

  1. Pick the space you make in and write one page of hygiene rules for it, including keeping food, laundry and pets out during production.
  2. Label every raw material with its name, supplier lot and date received, and start a raw material register.
  3. Write the manufacturing method for each product so it matches the formula version in your safety report.
  4. Use a batch record template for every batch: lots, weights, temperatures, checks, units filled and a signature.
  5. Open three short logs: deviations, complaints and change control. Ask your assessor before any formula or supplier change.
  6. Write a one-page recall plan, sign a GMP statement and file it with your manufacturing method in the PIF.

Frequently asked questions

Does GMP apply to small and home cosmetic makers?

Yes. Article 8 of Regulation (EC) No 1223/2009 says the manufacture of cosmetic products shall comply with good manufacturing practice, with no exemption for size. ISO 22716 is written as guidelines, so a sole trader can meet it with short procedures and good records rather than factory equipment.

Is ISO 22716 certification a legal requirement?

No. The law requires you to work to GMP and presumes you comply if you follow the harmonised standard, which is EN ISO 22716:2007. Certification by an audit body is voluntary. Some retailers, distributors and export markets ask for it, which is the usual reason to get one.

Does ISO 22716 still apply in Great Britain after Brexit?

Yes. The GB version of Article 8 refers to designated standards, and the UK government lists EN ISO 22716:2007 as the designated standard for cosmetic GMP. In practice the same standard serves both markets.

What does the PIF need to say about GMP?

Article 11(2)(c) asks for a description of the method of manufacturing and a statement on compliance with good manufacturing practice. A short, signed and dated statement that references your procedures and names the manufacturing site works, as long as the procedures and batch records behind it exist.

What should a cosmetic batch record include?

The date and batch code, the formula version, each ingredient with its weight and supplier lot, process details such as temperatures and times, the checks made and their results, how many units were filled with which packaging, any deviations, and a sign-off. It should let you trace any jar back to what went into it.

Can I make cosmetics in my kitchen?

No rule bans making cosmetics at home, but GMP still applies. You need to keep food preparation, laundry and pets out of the space while you make product, use equipment kept for cosmetics, store materials labelled and off the floor, and keep records. Many makers find a dedicated room or a separate unit easier to control.

Who signs the GMP statement in the PIF?

The law does not name a signatory. In practice the manufacturer declares that the product is made in line with ISO 22716 and the Responsible Person keeps that declaration in the PIF. If you make your own products and act as your own Responsible Person, you sign it yourself.

What changes if a contract manufacturer makes my product?

You still need the manufacturing method and the GMP statement for the PIF, and they have to come from the manufacturer. Write into the contract that they will share batch records on request and tell you before changing a formula, supplier or process. A manufacturer that refuses to share these leaves you unable to complete the PIF.

Official sources and legislation

S
Written by

Syed Muhammad Shamuel Shees

Founder & Lead Compliance Consultant

Phoenix Safety Consultants is a cosmetic compliance consultancy with offices in London, Tallinn and Pensacola. Our safety assessors and toxicologists prepare CPSRs, Toxicological Risk Assessments, PIFs, SDSs and UK/EU notifications for brands of every size. Talk to the team on WhatsApp or at compliance@phoenixcosmeticsafety.com.

Join the conversation