Doorgaan naar inhoud
Qualified safety assessorsUK · EU · USA
Get a quote
  1. Home
  2. BLOGS
  3. The 4-MBC Ban in UK Cosmetics: Finding It in Your Range, Clearing Old Stock by 14 January 2027 and Choosing a Replacement That Works in GB and the EU

The 4-MBC Ban in UK Cosmetics: Finding It in Your Range, Clearing Old Stock by 14 January 2027 and Choosing a Replacement That Works in GB and the EU

Where the filter still turns up, what the GB transitional rule really allows, why Northern Ireland stock is already out, and how to pick a replacement filter without walking into the homosalate and octocrylene differences

S Syed Muhammad Shamuel SheesFounder & Lead Compliance Consultant
Updated Nov 22, 2026 13 min read
Reviewed by Phoenix Cosmetic Safety · Nov 21, 2026
An orange sunscreen bottle with a seashell on a table at the beach.

The short answer

4-MBC (4-methylbenzylidene camphor, also called enzacamene) is banned in Great Britain. SI 2026/23 added it to Annex 2, the prohibited list, and removed it from Annex 6, the list of permitted UV filters. Products containing it could not be placed on the GB market from 15 July 2026, and units placed before then can be made available only until the end of 14 January 2027. Northern Ireland and the EU banned it under Regulation (EU) 2024/996, and it has been off the market there since 1 May 2026. Any replacement means a new formula, new SPF and UVA evidence and a reissued CPSR.

Key takeaways

  • 4-MBC is a prohibited substance in GB, not just a deleted UV filter. The ban covers every use, including as a light stabiliser in products with no SPF claim.
  • GB dates: no new placings from 15 July 2026; older units can be made available until the end of 14 January 2027, not 15 January.
  • Northern Ireland and the EU have not allowed any 4-MBC product to be made available since 1 May 2026, so GB stock cannot be moved there.
  • Look beyond sunscreens: day creams, lip balms, clear-bottle shower gels and white-label formulas are where it hides.
  • Pick replacements with the same maximum in both markets. Homosalate (EU: 7.34%, face only) and octocrylene in sprays are where GB and the EU differ.
  • A filter swap is a new formula: new SPF and UVA tests, new stability data, a new CPSR and an updated SCPN or CPNP notification.

Here is a call we have taken more than once this autumn. A brand has cleaned up its sunscreens for 4-MBC, sometimes two years ago for the EU. Then a retailer's compliance team runs a full ingredient scan and finds 4-Methylbenzylidene Camphor in a lip balm, a tinted day cream or a clear shower gel that nobody thought of as sun care. It had been there all along, doing a quiet job as a UV absorber, and it is now a prohibited substance in Great Britain.

The 4-MBC ban in UK cosmetics is simple on paper. Since 15 July 2026, products containing it cannot be placed on the GB market. Units placed before that date can be sold until the end of 14 January 2027. Northern Ireland and the EU finished with it on 1 May 2026. This guide is about the work that is left with under eight weeks to go: finding every product that still contains it, sorting the stock, and choosing a replacement filter that will not cause you a fresh problem in the EU. For the wider package of GB changes made by the same instrument, see our overview of the UK cosmetic regulation changes for 2026.

Where 4-MBC stands on 21 November 2026

4-MBC is the short name for 3-(4'-methylbenzylidene)-camphor, INCI name 4-Methylbenzylidene Camphor, also called enzacamene (CAS 36861-47-9 and 38102-62-4, EC 253-242-6). Until this year it sat in Annex 6 of the GB cosmetics regulation as UV filter number 18, allowed up to 4% in the finished product.

SI 2026/23 did two things to it, and it is worth knowing both because older articles often mention only one. Regulation 2(2) inserted it into Annex 2, the list of prohibited substances, as entry 1744. Regulation 2(5) omitted its entry from Annex 6. So it is not just off the list of permitted filters. It is banned outright, for every function, including the UV-absorber and light-stabiliser jobs it did in products with no SPF claim at all. The only tolerance left is the general one in Article 17 for traces that are technically unavoidable under good manufacturing practice, which does not cover anything added on purpose.

The EU had already done the same thing through Commission Regulation (EU) 2024/996, entry 1730 of Annex II, with the same two-step timetable about a year earlier. Northern Ireland follows the EU cosmetics rules, so it moved on the EU dates.

PointGreat Britain (England, Scotland, Wales)Northern Ireland and the EU
Legal instrumentSI 2026/23, regulation 2(2) and 2(5)Commission Regulation (EU) 2024/996
What the instrument didInserted 4-MBC into Annex 2 (prohibited substances) as entry 1744 and omitted entry 18 from Annex 6 (UV filters)Inserted 4-MBC into Annex II as entry 1730 and deleted entry 18 from Annex VI
Previous positionPermitted UV filter up to 4%Permitted UV filter up to 4%
No new placings from15 July 20261 May 2025
Existing stock may be made available untilThe end of 14 January 2027, for units placed before 15 July 202630 April 2026. From 1 May 2026 no unit may be made available
Scientific basisSAG-CS Opinion 18 (March 2025)SCCS opinion SCCS/1640/21 (final version 29 April 2022)
Position today, 21 November 2026No new placings. Older stock in the chain has under eight weeks leftFully off the market for almost seven months

One small but useful point: the GB instrument says 15 July 2026 and the end of 14 January 2027. Several summaries, including some lists you may have saved, round that to "15 January 2027". Do not plan around the rounded date. The last lawful day to make old stock available in GB is 14 January.

Why it was banned, briefly

4-MBC was not withdrawn for poor performance. In its 2022 opinion (SCCS/1640/21) the EU Scientific Committee on Consumer Safety could not conclude that it was safe, because the genotoxicity data were not enough to rule out a concern. It also found sufficient evidence that 4-MBC may act as an endocrine disruptor, with effects on the thyroid and oestrogen systems, and said it was not possible to set a safe maximum concentration. The Commission's 2024/996 recitals rely on that opinion and extend the ban beyond UV-filter use for that reason.

In Great Britain, the advice came from the government's Scientific Advisory Group on Chemical Safety (SAG-CS). Its Opinion 18, dated March 2025, agreed that 4-MBC shows endocrine-disrupting properties in vivo, noted gaps in the genotoxicity and reproductive toxicity data, and said the group could not derive a safe level for use in sunscreens or other cosmetics. The Explanatory Memorandum to SI 2026/23 cites that opinion as the basis for the change.

Why does the reasoning matter to a brand? Because "no safe level" is the answer to anyone who asks whether a lower percentage would do. It would not, and your safety assessor cannot sign off a product that contains it.

Finding 4-MBC in your range: it is not only sunscreens

Start with a search of every formula and every published ingredient list for "4-Methylbenzylidene Camphor". Then search for the other names it travels under: enzacamene, 3-(4-methylbenzylidene) camphor, the two CAS numbers above, and supplier trade names such as Eusolex 6300. Supplier specifications often use the trade name while the label uses the INCI name, so check both sides.

The places it hides are fairly predictable once you know its history.

Where to lookWhy 4-MBC turns up thereWhat to check
Sunscreens and after-sun with a factorThe obvious one. It was a common UVB partner in older European formulasEvery filter in the INCI list and the formula sheet, not just the hero filters
Daily SPF moisturisers, tinted creams, BB and CC creamsLow-cost UVB contribution in products where SPF is a secondary claimFormulas inherited from a contract manufacturer or a white-label range
Lip balms and lip products with SPFOil-based bases suit an oil-soluble filterSmall stick products sold through gift and tourist channels, which turn over slowly
Clear-bottle shower gels, hair products and fragrancesUsed at low levels as a UV absorber or light stabiliser to protect colour and fragrance, with no SPF claim at allAny ingredient list showing 4-Methylbenzylidene Camphor, even near the end
Imported and older stockProducts made for markets that still allowed it, or made before the EU changeBatch dates and the country the formula was written for

The light-stabiliser use is the one that catches people out. A shower gel in a clear PET bottle has no SPF claim, so nobody files it under sun care, yet it may carry 4-MBC at a fraction of a percent to stop the colour fading in a shop window. The ban covers it exactly as it covers a sunscreen. If a formula sheet lists 4-MBC with the function "UV absorber" or "light stabiliser", treat it the same way.

White-label and contract-manufactured products deserve a second look. If you bought a formula rather than wrote it, ask your supplier in writing to confirm the absence of 4-MBC for each product and batch. Keep the reply in the product information file.

Old stock: what the GB window really allows

The transitional rule is regulation 3(a) of SI 2026/23. A product placed on the GB market before 15 July 2026 may continue to be made available until the end of 14 January 2027. "Placed on the market" means the first time that unit was supplied for distribution or use in GB, so the test applies unit by unit, not product by product. "Made available" covers any supply in the course of business, including free samples and gifts with purchase.

There is a drafting quirk you should know about if you sell products with formaldehyde-releasing preservatives as well. Regulation 3(a) is written as one clause covering both 4-MBC and the new formaldehyde warning, and its two conditions are joined by "and": the product contains 4-MBC, and it is labelled in line with the formaldehyde rule as it stood before 15 July 2026. The Explanatory Memorandum describes the window as covering products that contain 4-MBC "or" formaldehyde releasers. Our reading is that a 4-MBC product without any releaser meets the second condition automatically, because the old rule asked nothing of it. A 4-MBC product that also contains a releaser above 0.05% needed the old 'contains formaldehyde' line to qualify. We cover the formaldehyde side in our guide to the 'releases formaldehyde' warning on GB labels.

With that settled, sort the stock by where each unit is today.

Where the unit is todayWhat appliesWhat we would do
In the GB chain (your warehouse after dispatch, a distributor, a retailer), placed on the GB market before 15 July 2026Can be made available until the end of 14 January 2027, under regulation 3(a) of SI 2026/23Sell through where it is realistic, and plan to have nothing left on GB shelves or websites after that date
Made before 15 July 2026 but still sitting with you, never supplied to anyoneNever placed on the market, so the transitional window does not cover it. Supplying it now would be a new placing of a prohibited productDo not release it to the GB market. Destroy it, or export only to a market where its formula is lawful
Anywhere in Northern Ireland, or with an EU distributorProhibited from being made available since 1 May 2026Withdraw it now if any is still out there
GB stock you hoped to move to Northern Ireland or the EUNot possible. The ban there is already completeDo not ship it
Pre-printed cartons and labels for a 4-MBC formulaThe packaging is not illegal, but the INCI list and possibly the SPF claim will be wrong for the new formulaCount them now. The new formula will almost certainly need new artwork

What happens after 14 January? Any 4-MBC unit still on a GB shelf or website is non-compliant. That is a withdrawal, not normally a recall, unless there is a reason to get units back from consumers. Our guide to unsold stock after a ban with no sell-through walks through that distinction and the liability between brand, distributor and retailer, which works the same way here. Tell your retailers the date now. Most of them will want to clear stock well before the last day, and an online listing left live by mistake is the easiest way to end up selling a unit after the date.

What 4-MBC was doing in the formula

4-MBC is an organic filter that absorbs mainly in the UVB range. It is a crystalline solid that dissolves in the oil phase, and in older European sunscreens it often sat in a package with avobenzone for UVA and octocrylene or a cinnamate for more UVB. It was cheap, it had a long history and it added a useful slice of the SPF.

Taking it out disturbs three things at once. The UVB total drops, so something has to fill the gap. The ratio between UVA and UVB protection shifts, which matters because the UVA claim is judged relative to the SPF. And the oil phase changes, so other solid filters may stop staying in solution, or the viscosity and feel move. If avobenzone is in the system, its stabilising partners need checking again, because avobenzone loses protection under light unless the system holds it steady.

A typical case looks like this. A daily SPF 30 face cream used 4% 4-MBC, 3% avobenzone and 7% octocrylene. The obvious paper swap is 4% homosalate. In GB that works legally. In the EU and Northern Ireland homosalate is limited to 7.34% in face products, so 4% is fine on the face cream. Now copy the same swap into the body lotion version of the range, which most brands would, and you have a product that is legal in GB but not in NI or the EU, where homosalate is not allowed as a UV filter in body products at all. A replacement built around ethylhexyl triazone and bis-ethylhexyloxyphenol methoxyphenyl triazine avoids that trap in both products. That is an illustration of the reasoning, not a formula, and the real answer depends on your base and your target factor.

Choosing a replacement that is legal in GB and the EU

There is no single drop-in substitute. What there is now is a short list of filters with the same maximum in both markets, and a few that differ. If you sell in GB only, the GB column is the law you have to meet. If any of the range goes to Northern Ireland or the EU, design to the stricter column from the start, so that one formula and one CPSR can cover both.

Filter (INCI)Main roleMaximum in GB (Annex 6)Maximum in the EU and NI (Annex VI)What to watch
Ethylhexyl TriazoneUVB5%5%Very efficient per percent. A crystalline solid, so check it stays dissolved in your oil phase at low temperature
Diethylhexyl Butamido TriazoneUVB with some UVA210%10%Oil-soluble solid. Often paired with ethylhexyl triazone
Bis-Ethylhexyloxyphenol Methoxyphenyl TriazineBroad spectrum10%10%Photostable and helps stabilise avobenzone. Usually the core of a modern EU-compatible system
Methylene Bis-Benzotriazolyl TetramethylbutylphenolBroad spectrum10% (nano form under conditions)10% (nano form under conditions)Dispersed particle filter. The nano form needs a [nano] label and must not be used where the user could inhale it
Ethylhexyl MethoxycinnamateUVB10%10%Cheap and familiar, but photounstable alongside avobenzone unless the system is stabilised
Ethylhexyl SalicylateUVB5%5%A weak filter that mainly helps solubilise others
OctocryleneUVB, stabiliser10%9% in propellant sprays, 10% in other productsBenzophenone impurity must be kept at trace level. Spray formats differ between the two markets
HomosalateUVB10%, any product type7.34%, face products only, not propellant spraysThe biggest trap. A GB body sunscreen built on homosalate is not legal in NI or the EU
Phenylbenzimidazole Sulfonic AcidUVB, water phase8% (as acid)8% (as acid)Water soluble and pH dependent. Neutralise it fully
Zinc Oxide and Titanium DioxideBroad spectrum (zinc), UVB and UVA2 (titanium)25% each, nano forms under conditions25% each, nano forms under conditionsNot in applications that could lead to inhalation. Nano grades need the [nano] label. White cast changes the product

Two of those rows deserve emphasis. Homosalate is the filter most likely to slip into a GB reformulation because it is cheap and familiar, and GB still allows it at 10% in any product. The EU cut it to 7.34% in face products only, with full effect from 1 July 2025. Octocrylene differs only in propellant sprays. Benzophenone-3 used to be a third difference, but GB brought its limits into line with the EU through SI 2025/901 from 21 January 2026. Our guide to UV filters in cosmetics and Annex VI explains how the positive list works.

Check the filter's own conditions as well as the maximum. Nano grades of zinc oxide, titanium dioxide and the particulate triazole filter are only permitted if they meet the specifications in the annex, they must appear in the ingredient list with "(nano)" after the name, and none of them may be used in applications that could expose the user's lungs. As UV filters regulated in Annex VI, they do not need the separate six-month nano notification under Article 16, but the labelling rule still applies.

The evidence you will have to redo

Your SPF number belongs to the formula it was measured on. Change the filters and it no longer belongs to you, however small the change looks. Expect to repeat the SPF determination (normally in vivo under ISO 24444), the UVA protection test, any water-resistance claim, photostability work if avobenzone is in the system, and stability and packaging compatibility on the new formula. If the base has moved enough, run a fresh preservative challenge test too.

The labelling side follows the European Commission's 2006 Recommendation on sunscreen efficacy, which is still the reference point for sunscreen labelling in both GB and the EU: a UVA protection factor of at least one third of the labelled SPF, a critical wavelength of at least 370 nm, and the protection category shown at least as prominently as the number. Our guide to sun protection claims, SPF testing and labelling rules covers the methods and the label in detail, so we will not repeat it here. Book laboratory slots early. Test house capacity before the spring season is the usual bottleneck, and the last weeks of the year fill quickly.

What changes in your CPSR and product file

A filter swap makes a new formula, even when the name and the pack do not change. Part A of the Cosmetic Product Safety Report has to be redone: the quantitative composition, the exposure calculation and a margin of safety for each new filter, using the systemic exposure data the assessor relies on. Part B then needs a new conclusion, with any warnings and conditions of use that apply to the new filters in the market the product goes to.

The product information file should hold the new formula with the function of each filter, the raw material specifications (including nano characterisation where relevant), the new SPF, UVA, water-resistance and photostability reports, the stability and compatibility data, and the new artwork. Keep the supplier's confirmation that 4-MBC is absent. Then update the notification: SCPN for Great Britain, and CPNP for Northern Ireland and the EU, so the notified formula matches what you sell.

Our article on the CPSR review cycle and regulation changes explains why a ban like this reopens a report that was otherwise current. Bringing the assessor in while the formula is still moving is cheaper than asking for a report on a formula that later fails its SPF test. If a product is a slow seller, discontinuing it can be the sensible answer, and that is a decision worth making before you spend money on testing.

Reformulating a product that used 4-MBC?

Send us the current formula, the claims you need to keep and the markets the product goes to. We check every replacement filter against the GB and EU lists, flag the homosalate and octocrylene traps, plan the testing in the right order, and tell you what to do with any 4-MBC stock still in the GB chain before 14 January 2027.

Plan your reformulation Check your ingredients

Related reading

Myths we hear

  • I can keep 4-MBC at a lower percentage. You cannot. It is now in Annex 2, the prohibited list, and both the SCCS and SAG-CS said they could not set a safe level. There is no low-level exemption.
  • It only affects sunscreens. The ban covers every function. Products that used 4-MBC as a UV absorber or light stabiliser, such as clear-bottle shower gels or fragrances, are caught too.
  • Old stock can be sold until 15 January 2027. The instrument says until the end of 14 January 2027, and only for units placed on the GB market before 15 July 2026. Stock still unsold in your own warehouse on that date was never placed, so it has no window.
  • If it is legal in GB, it is legal in Northern Ireland. Northern Ireland follows the EU list. 4-MBC has been off the market there since 1 May 2026, and replacement filters such as homosalate have tighter EU limits.
  • Swapping one filter is a minor update to the CPSR. It changes the quantitative composition, so the exposure, the margin of safety and the conclusion are redone, and the SPF and UVA tests are repeated on the new formula.

What to do this week

  1. Search every formula, specification and ingredient list for 4-Methylbenzylidene Camphor, enzacamene, both CAS numbers and supplier trade names.
  2. Include lip balms, tinted day creams, clear-bottle products and white-label ranges in the search, not just sun care.
  3. Ask contract manufacturers and suppliers to confirm in writing that 4-MBC is absent, product by product.
  4. Sort GB stock by when it left you, and plan to have no 4-MBC unit available in GB after the end of 14 January 2027.
  5. Withdraw any 4-MBC stock still in Northern Ireland or the EU now, and tell retailers the GB date in writing.
  6. Choose replacement filters with the same maximum in GB and the EU if any of the range goes to NI or the EU. Avoid building on homosalate.
  7. Book SPF, UVA and stability testing on the final formula before any artwork is printed.
  8. Send the new formula and evidence to your safety assessor, then update SCPN and CPNP notifications.

Frequently asked questions

What is 4-MBC?

4-Methylbenzylidene camphor, also called enzacamene, is an organic UV filter that absorbs mainly UVB. It was allowed in GB and EU cosmetics up to 4% and was also used at low levels as a UV absorber or light stabiliser in products with no SPF claim.

Is 4-MBC banned in the UK?

In Great Britain, yes. SI 2026/23 added it to Annex 2, the prohibited list, and removed it from the UV filter annex. No product containing it can be placed on the GB market from 15 July 2026. Northern Ireland follows the EU ban, which has applied in full since 1 May 2026.

Can I still sell 4-MBC products I already have?

Only units placed on the GB market before 15 July 2026, and only until the end of 14 January 2027. Units still in your own warehouse on 15 July 2026 were never placed on the market and cannot now be supplied in GB. Nothing can be sold in Northern Ireland or the EU.

Why was 4-MBC banned?

The SCCS (2022) and the UK's SAG-CS (2025) both found evidence that 4-MBC may act as an endocrine disruptor, affecting thyroid and oestrogen systems, noted gaps in the genotoxicity data, and could not derive a safe level for use in cosmetics.

What can replace 4-MBC in a sunscreen?

There is no single substitute. Ethylhexyl triazone, diethylhexyl butamido triazone, bis-ethylhexyloxyphenol methoxyphenyl triazine and mineral filters all have the same maximum in GB and the EU. Homosalate is allowed at 10% in GB but only 7.34% in EU face products, so avoid relying on it if you sell in both.

Do I need to retest SPF after removing 4-MBC?

Yes. SPF, UVA protection and any water-resistance claim belong to the formula they were measured on. A filter change means repeating them, along with photostability, stability and compatibility work on the new formula.

Does the GB sell-through date apply in Northern Ireland?

No. Northern Ireland follows the EU rules under Regulation (EU) 2024/996. New products with 4-MBC could not be placed there from 1 May 2025, and none could be made available from 1 May 2026.

Do I need a new CPSR after replacing 4-MBC?

In practice, yes. The quantitative formula changes, so the exposure and margin of safety are recalculated and the conclusion reissued, with the new SPF and stability evidence in the product file. Update the SCPN notification, and CPNP if you sell in NI or the EU.

Official sources and legislation

S
Written by

Syed Muhammad Shamuel Shees

Founder & Lead Compliance Consultant

Phoenix Safety Consultants is a cosmetic compliance consultancy with offices in London, Tallinn and Pensacola. Our safety assessors and toxicologists prepare CPSRs, Toxicological Risk Assessments, PIFs, SDSs and UK/EU notifications for brands of every size. Talk to the team on WhatsApp or at compliance@phoenixcosmeticsafety.com.

Join the conversation