In this article
The short answer
In Great Britain, a cosmetic product containing a formaldehyde-releasing preservative from Annex 5 must carry the words 'releases formaldehyde' where the concentration of formaldehyde in the finished product exceeds 0.001% (10 ppm). The rule, made by SI 2026/23, applies to products placed on the GB market from 15 July 2026. Units placed before that date and correctly labelled under the old rule can be sold until the end of 14 January 2027. Northern Ireland and the EU use the same wording and threshold, and have required it on every unit since 1 August 2026.
Key takeaways
- It is a labelling duty, not a ban. DMDM hydantoin, imidazolidinyl urea, diazolidinyl urea and the other releasers stay permitted within their Annex 5 limits.
- The trigger is formaldehyde in the finished product above 0.001% (10 ppm), measured on the product, not worked out from the formula. Two releasers count together.
- The wording changed too: 'contains formaldehyde' packs are not compliant for new GB placings.
- GB stock placed before 15 July 2026 can be sold until the end of 14 January 2027. The transitional clause is oddly drafted, so keep the Explanatory Memorandum in your file if you rely on it.
- Northern Ireland and the EU have the same wording and threshold, in full since 1 August 2026, so one label now serves all three.
- Most releaser-preserved products will be over 10 ppm. Test at a realistic age, or apply the warning as a precaution and record why.
Most brands we speak to heard about the 'releases formaldehyde' label in the UK the same way: a line in a newsletter saying the threshold had dropped. Then nothing happened for a few months, and then a retailer's compliance team started asking for evidence. That is roughly where many small brands are now, in late November 2026. The GB rule has applied to new stock since 15 July, the window for older stock closes at the end of 14 January 2027, and the questions coming in are practical ones. Which of my products are caught? How do I get a number I can trust? Can I sticker what I already have?
This guide answers those. It is not a ban, and nobody has to throw away a formula because of it. It is a labelling duty with a chemistry question underneath, which is an awkward mix because the two jobs usually sit with different people. For the wider set of GB changes made at the same time, including the 4-MBC ban, see our overview of the UK cosmetic regulation changes for 2026.
What changed on 15 July 2026, word for word
The change itself is tiny. Regulation 2(4) of SI 2026/23 made two substitutions in paragraph 2 of the Preamble to Annex 5 of the GB cosmetics regulation: the word "contains" became "releases", and "0,05" became "0.001". The paragraph now reads that all finished products containing substances in Annex 5 which release formaldehyde must be labelled with the warning 'releases formaldehyde' where the concentration of formaldehyde in the finished product exceeds 0.001%.
So two things moved at once. The threshold fell fifty-fold, from 0.05% (500 ppm) to 0.001% (10 ppm). And the wording changed, which matters for products that already carried the old 'contains formaldehyde' line. Those packs are not compliant for new placings either. The government's advisers, the Scientific Advisory Group on Chemical Safety (SAG-CS), had concluded that the old threshold did not protect people already allergic to formaldehyde, and that 10 ppm was appropriate for both leave-on and rinse-off products. The EU's Scientific Committee on Consumer Safety reached the same figure in 2021.
Three details are worth getting right before anything goes to print:
- The test is "exceeds". A product at exactly 0.001% does not trigger the warning. In practice nobody should plan around that, because at 10 ppm the uncertainty of the measurement is bigger than the margin.
- It only applies to products containing an Annex 5 substance that releases formaldehyde. Formaldehyde itself has been prohibited outright (Annex 2, entry 1577) since it was classified as a category 1B carcinogen, so the warning exists purely for the releasers.
- The wording is fixed. 'Releases formaldehyde' is the phrase in the annex. Paraphrases like 'may contain traces of formaldehyde' do not do the job.
Which preservatives can trigger the warning
Neither regime publishes a list of releasers. The duty attaches to any Annex 5 preservative "which releases formaldehyde", so the identification is your job and your assessor's. In practice the list is short. Both the SAG-CS opinion and the SCCS advice name the same core group, and the table below gives their GB entries as they stand on legislation.gov.uk today. The EU entries carry the same numbers and limits.
| Preservative (INCI) | Annex V entry | Maximum in the finished product | Other conditions in the GB annex |
|---|---|---|---|
| DMDM Hydantoin | 33 | 0.6% | None beyond the general warning rule |
| Imidazolidinyl Urea | 27 | 0.6% | None beyond the general warning rule |
| Diazolidinyl Urea | 46 | 0.5% | None beyond the general warning rule |
| Sodium Hydroxymethylglycinate | 51 | 0.5% | Not to be used if the maximum theoretical releasable formaldehyde in the product, from any source, is 0.1% w/w or more |
| 2-Bromo-2-nitropropane-1,3-diol (Bronopol) | 21 | 0.1% | Avoid formation of nitrosamines |
| Methenamine | 30 | 0.15% | None beyond the general warning rule |
| Benzylhemiformal | 55 | 0.15%, rinse-off products only | Rinse-off only |
| Also worth asking your supplier about: 5-Bromo-5-nitro-1,3-dioxane, Dimethyl Oxazolidine, 7-Ethylbicyclooxazolidine | 20, 45, 49 | 0.1% rinse-off only; 0.1%; 0.3% | Not in the regulators' example lists, but often described as formaldehyde donors. Get release data before you decide |
Two things to notice. First, every one of these remains a permitted preservative within its limits. The labelling rule sits on top of the entry, it does not replace it. Our guide to cosmetic preservatives covers how the Annex 5 entries work more generally. Second, glyoxal and polyoxymethylene urea also release formaldehyde, but neither is an Annex 5 preservative, so the preamble rule is not what governs them. If a supplier's raw material contains either, that belongs in your safety assessment rather than on the label.
The question we get most often: what about a formula with two releasers, each well inside its own maximum? The EU text answers it directly, because the threshold applies to total formaldehyde released "irrespective of whether the finished product contains one or more substances releasing formaldehyde". The GB text does not repeat that phrase, but it measures "the concentration of formaldehyde in the finished product", which in our reading comes to the same thing. You add nothing up on paper. You measure the product.
What 0.001% is measured on, and how to get a number
Here is the part that catches brands out. Your formulation sheet tells you how much DMDM hydantoin went in. It does not tell you how much free formaldehyde is in the jar, because release depends on the dose, the pH, the temperature, the base and the age of the product. A shampoo can sit at one level the week it is filled and at another a year later.
The SCCS advice quotes a review finding that, in the right conditions, almost every releaser can push free formaldehyde above 200 ppm. Set that against a 10 ppm trigger and the honest expectation is this: if a product is preserved with a releaser at a working dose, assume it needs the warning until a test says otherwise. Coming in under 10 ppm is possible, usually in low-dose or carefully buffered systems, but it is the exception.
That leaves three routes:
- Test the finished product. This is the only route that gives a yes or no. Ask the laboratory which method it uses and whether it is validated for products containing releasers, because SAG-CS itself noted that some releasers decompose in water-based systems and are hard to analyse. Test retained or stability samples at a realistic age, not only fresh batches.
- Ask your supplier for release data in a comparable base. Useful for deciding where to spend testing money, not enough on its own to justify leaving the warning off.
- Apply the warning as a precaution to everything containing a releaser. No testing cost, legally safe, and the route most small brands take. The trade-off is commercial: a buyer or a customer with a formaldehyde allergy will notice it, which is partly the point of the rule.
Whichever you choose, write it down. A two-line note in the product file saying "warning applied as a precaution, no testing" saves a lot of confusion when someone new picks up the file in two years.
Great Britain and Northern Ireland, side by side
A lot of guidance still says Northern Ireland "may differ in the figure". It does not. Both regimes now use the same words and the same 0.001% threshold. What differs is the timing, and the EU went first by two years.
| Point | Great Britain (England, Scotland, Wales) | Northern Ireland and the EU |
|---|---|---|
| Where the rule sits | Paragraph 2 of the Preamble to Annex 5, as amended by SI 2026/23, regulation 2(4) | Point 2 of the Preamble to Annex V, as replaced by Regulation (EU) 2022/1181 |
| Wording on the pack | 'releases formaldehyde' | 'releases formaldehyde' |
| Trigger | Concentration of formaldehyde in the finished product exceeds 0.001% | Total concentration of formaldehyde released in the finished product exceeds 0.001% (10 ppm), whether the product contains one releaser or several |
| Previous rule | 'contains formaldehyde' above 0.05% | 'contains formaldehyde' above 0.05% |
| New products | Placed on the market from 15 July 2026 | Placed on the market from 1 August 2024 |
| Old stock sell-through ends | End of 14 January 2027, for units placed before 15 July 2026 | 31 July 2026, for units placed by 31 July 2024 |
| Position today, 21 November 2026 | New placings need the warning; older stock still in its window | Every unit made available needs the warning |
| Sodium Hydroxymethylglycinate | Not to be used if releasable formaldehyde is 0.1% w/w or more | Not to be used unless it can be shown that releasable formaldehyde is below 0.1% w/w |
| Language | English (Cosmetic Products Enforcement Regulations 2013, regulation 5(3)) | Northern Ireland: English, under the same regulation 5(3). EU countries: the language each country requires |
The EU change came through Regulation (EU) 2022/1181, which applied to new placings from 1 August 2024 and gave older stock until 31 July 2026. Northern Ireland follows the EU cosmetics rules, and SI 2026/23 extends only to England, Wales and Scotland. So an NI shop shelf has needed the new wording on every unit since August, while a shop in Manchester can still lawfully sell an older unit until mid-January.
The good news for anyone redesigning artwork: one label now works everywhere. A pack carrying 'releases formaldehyde' in English satisfies GB, NI and the EU text on this point, so there is no longer any reason to run two variants for the formaldehyde warning alone. Other particulars, such as the Responsible Person address, may still force two versions. Our guide to dual-market safety reports covers where GB and EU documents still split, and the NI notification side is in our guide to CPNP notification for Northern Ireland.
One genuine difference sits in the sodium hydroxymethylglycinate entry. GB says it is not to be used if releasable formaldehyde reaches 0.1% w/w. The EU, since Regulation (EU) 2022/1531, says it is not to be used unless it can be shown that releasable formaldehyde is below 0.1% w/w. Same number, different burden of proof. For an EU or NI product, the evidence has to exist before the product goes out.
The 14 January 2027 cut-off and the 'and' in regulation 3
Regulation 3(a) of SI 2026/23 is the GB sell-through rule. A product placed on the market before 15 July 2026 "may continue to be made available on the market until the end of 14th January 2027" if it meets two conditions. Read the conditions closely, because the drafting is odd. The product must (i) contain 4-MBC, the UV filter banned by the same instrument, and (ii) be labelled in line with the formaldehyde rule as it stood before 15 July 2026.
Read literally, that only protects a product that contains 4-MBC and also met the old labelling rule. A night cream preserved with DMDM hydantoin and containing no sunscreen filter would not qualify. The Explanatory Memorandum, however, describes the window as covering products that contain 4-MBC, or formaldehyde-releasing preservatives labelled to the old requirements. The policy intent is plainly two separate windows, and that is how we read it. But it is a point a trading standards officer could raise, so:
- If you rely on the window for releaser products, keep a copy of the Explanatory Memorandum wording in the product file with your stock records.
- Remember the second condition. A unit only qualifies if it met the old rule, so a product above 0.05% that carried no warning at all was never covered.
- Do not plan any sales past the end of 14 January 2027. From 15 January every unit made available in GB needs the new wording if it is over 0.001%, wherever it sits in the chain.
Also remember what "placed on the market" means. The window covers units that had already left you for the GB market before 15 July. Stock made in May but still in your warehouse in July was never placed, and gets no window. We explain the difference between placing and making available, with worked examples, in our guide to Omnibus VIII and unsold stock.
Getting the warning onto a pack that is already full
The warning is one of the "particular precautions to be observed in use" under Article 19(1)(d), which covers at least those listed in Annexes 3 to 6. That tells you three things. It must be on the container and the packaging in indelible, easily legible and visible lettering. It must be in English for Great Britain, under regulation 5(3) of the Cosmetic Products Enforcement Regulations 2013. And it belongs with the other warnings, not inside the ingredient list.
On a 250 ml bottle that is a layout tweak. On a 10 ml roll-on or a lip product it is a design job. Article 19(2) gives the usual way out where it is genuinely impossible for practical reasons: put the precautions on an enclosed or attached leaflet, label, tape, tag or card, and refer to it with the hand-and-book symbol from Annex 7 on the container or packaging. Peel-and-reveal labels do the same job. What you cannot do is drop another mandatory particular to make space.
For stock already printed, over-stickering is the obvious fix, and for a labelling defect it is a legitimate one. Our reading is that a sticker satisfies the rule if it carries the exact wording, is durable enough to count as indelible in normal use, and does not cover anything else that has to be visible. Test a few on the actual pack in a humid bathroom for a fortnight before you sticker a whole pallet. Labels that peel off in the shower help nobody.
While the artwork is open, check the rest. We regularly see brands add the formaldehyde line correctly and then find the batch code, the period-after-opening symbol or the Responsible Person address also needed work. Our 14-point label review checklist is the quick version, our guide to mandatory label warnings sets out where warnings sit, and the free label compliance checker handles a single label.
Stock you are holding today: a sorting table
With about eight weeks left on the GB window, most of the useful work now is sorting stock. Start from where each unit physically is and when it left you, then apply the table.
| Where the unit is today | What applies | What we would do |
|---|---|---|
| Left you for a GB customer before 15 July 2026 and was correctly labelled under the old rule | Can stay on sale in GB until the end of 14 January 2027 (see the drafting point above) | Sell it through, but plan to clear or over-sticker anything still in the chain by early January |
| Made before 15 July 2026 but still in your own warehouse on that date | Never placed on the market, so no window. Each unit placed now needs the warning if over 0.001% | Over-sticker before dispatch, or hold it for a market where it complies |
| Placed in GB after 15 July 2026 without the warning, and over 0.001% | Not compliant | Stop supply, correct the labels, and decide with your assessor whether units already sold need corrective action |
| Tested at end of shelf life and comfortably at or below 0.001% | No warning needed in either market | Keep the report, the method and the batch in the product file |
| Sitting in Northern Ireland or heading to the EU | EU rule in full since 1 August 2026, no window left | Every unit over 0.001% needs the warning now |
| Pre-printed cartons and labels not yet used | Using them on new placings in GB is not compliant if the product is over 0.001% | Count them, then sticker, reprint or scrap. This is usually where the real cost sits |
The row that costs money is usually the last one. A brand with twelve months of pre-printed cartons has a bigger problem than the chemistry, which is why the carton count should happen this week, not in January. If the product file shows the decision, the date and the quantities for each group, you will have an answer ready if a retailer or an inspector asks.
What changes in your safety report and product file
If the formula has not changed, your Cosmetic Product Safety Report has not become wrong. It has become incomplete. Part B records the warnings and instructions the assessor considers necessary, so the new wording needs to be there, along with the basis for it: a free formaldehyde result, or a note that the warning is applied as a precaution. The label in the file should match the artwork actually being printed.
Changing the preservative to avoid the warning is a much bigger job. A new preservative means a new quantitative formula, new exposure and margin of safety calculations, and a new challenge test, because the old preservative efficacy result does not carry over. Some brands go this way for commercial reasons. On cost alone, the warning usually wins. Our article on the CPSR review cycle and regulation changes explains which changes reopen a report, and a reformulated product can be reassessed as a single-variant CPSR.
Keep an eye on sodium hydroxymethylglycinate in particular. Because its entry carries its own 0.1% releasable formaldehyde condition, the assessor needs to see a release figure or calculation for it anyway. If you are gathering data for that, the same work often answers the warning question at no extra cost. For the bigger picture of what else changed this year in both markets, see our overview of the 2026 cosmetic regulation changes.
Not sure which of your products need the formaldehyde warning?
Send us your formulas, any free formaldehyde results you have and your current artwork. We tell you which products contain a releaser, which need the warning in Great Britain, Northern Ireland and the EU, how to fit it on each pack, and what to do with stock already printed before 14 January 2027.
Related reading
- UK cosmetic regulation changes 2026 (SI 2026/23)
- Cosmetic regulation changes in 2026: UK and EU
- Cosmetic preservatives explained
- Mandatory cosmetic label warnings, UK and EU
- Cosmetic label review checklist: 14 things
- One CPSR for the UK and EU?
- Omnibus VIII and unsold stock
- All regulatory compliance articles
Myths we hear
- Formaldehyde releasers are banned in the UK now. They are not. They remain permitted Annex 5 preservatives within their limits. What changed is the point at which the pack must say 'releases formaldehyde'.
- If each preservative is under its own maximum, I don't need the warning. The trigger is formaldehyde in the finished product, and the EU text says expressly that it counts whether there is one releaser or several. Two compliant preservatives can together take a product over 10 ppm.
- My old 'contains formaldehyde' label still works. Not for units placed in GB from 15 July 2026, or for any unit in NI or the EU since 1 August 2026. The prescribed words are now 'releases formaldehyde'.
- Northern Ireland has a different threshold. It does not. The figure and the wording are the same. Only the dates differ, and the EU rule took full effect earlier, on 1 August 2026.
- Rinse-off products are exempt. There is no rinse-off exemption in the warning rule. SAG-CS considered 10 ppm appropriate for leave-on and rinse-off products alike.
What to do this week
- Pull every formula containing DMDM hydantoin, imidazolidinyl urea, diazolidinyl urea, sodium hydroxymethylglycinate, bronopol, methenamine or benzylhemiformal, and ask suppliers about any other preservative that may release formaldehyde.
- Decide per product: test the finished product at a realistic age, or apply 'releases formaldehyde' as a precaution. Record the decision.
- Count GB stock by when it left you: before 15 July 2026, after, or never yet placed.
- Diary the end of 14 January 2027 and plan to have no non-compliant units in the GB chain after it.
- Treat NI and EU stock as fully in scope now. Every unit over 0.001% needs the warning.
- Count pre-printed cartons and labels, then choose: sticker, reprint or scrap.
- Trial any over-sticker on the real pack for durability before using it at scale.
- Update Part B of the CPSR and the product file so the warning, its basis and the artwork all match.
Frequently asked questions
What exactly must the formaldehyde warning say?
The words 'releases formaldehyde'. That is the phrase in the Annex 5 preamble in both Great Britain and the EU. The old wording, 'contains formaldehyde', is no longer enough for products placed in GB from 15 July 2026, or for any product in Northern Ireland or the EU since 1 August 2026.
Is 0.001% measured on the preservative or the finished product?
On formaldehyde in the finished product. The amount of preservative you added does not answer the question, because release depends on dose, pH, base and age. Analysis of the finished product, ideally at a realistic age, is the only direct answer.
Which preservatives are formaldehyde releasers?
The usual Annex 5 examples are DMDM hydantoin, imidazolidinyl urea, diazolidinyl urea, sodium hydroxymethylglycinate, bronopol, methenamine and benzylhemiformal. The law publishes no list, so ask your supplier about any other preservative that may release formaldehyde.
What are the GB dates for the releases formaldehyde label?
Products placed on the GB market from 15 July 2026 need the new warning if they exceed 0.001%. Units placed before then and correctly labelled under the old rule can be made available until the end of 14 January 2027. After that, every unit in the GB chain must comply.
Does Northern Ireland follow the GB rule?
No. Northern Ireland follows the EU cosmetics rules. The EU wording and the 0.001% threshold are the same as GB's, but under Regulation (EU) 2022/1181 they have applied to every unit made available since 1 August 2026.
Do I have to test, or can I just add the warning?
You can add the warning without testing. It is lawful and common. If you want to leave it off, you need analytical evidence that formaldehyde in the finished product does not exceed 0.001%, kept in the product file.
Can I over-sticker existing stock?
Yes, for a labelling problem a sticker is a legitimate fix, provided it carries the exact wording, is durable and legible, and does not hide any other mandatory information. Test it on the real pack before you sticker a whole batch.
Do I need a new CPSR?
Not if the formula is unchanged, but Part B should be updated to record the warning and its basis. If you switch preservative to avoid the warning, that is a new formula needing new exposure calculations, a new margin of safety and a new challenge test.
Official sources and legislation
- SI 2026/23, Cosmetic Products Regulation (EC) No 1223/2009 (Restriction of Chemical Substances) (Amendment and Transitional Provisions) Regulations 2026, regulations 1 to 3
- Explanatory Memorandum to SI 2026/23
- Regulation (EC) No 1223/2009 as it applies in Great Britain, Annex V (preservatives) and preamble
- Regulation (EC) No 1223/2009 as it applies in Great Britain, Article 19 (labelling)
- Cosmetic Products Enforcement Regulations 2013, regulation 5 (language)
- Commission Regulation (EU) 2022/1181 amending the preamble of Annex V, Official Journal text
- Regulation (EC) No 1223/2009, EU consolidated version of 18 May 2026 (Annex V)
- SCCS scientific advice on the threshold for the formaldehyde warning (SCCS/1632/21)
- SAG-CS Opinion 16: Formaldehyde releasing substances
- GOV.UK: Making cosmetic products available to consumers in Great Britain
Join the conversation