Doorgaan naar inhoud
Qualified safety assessorsUK · EU · USA
Get a quote
  1. Home
  2. BLOGS
  3. How to Use CosIng: A Step-by-Step Walkthrough of the EU Cosmetic Ingredient Database

How to Use CosIng: A Step-by-Step Walkthrough of the EU Cosmetic Ingredient Database

Which box to type in, which filters to set, how to read the entry you land on, and the three habits that stop a two-minute lookup turning into a relabel

S Syed Muhammad Shamuel SheesFounder & Lead Compliance Consultant
13 min read
Reviewed by Phoenix Cosmetic Safety · Nov 16, 2026
A woman using a laptop at a table with beauty products, looking up cosmetic ingredient data.

The short answer

Open CosIng, type a name fragment or the CAS number into the quick search, leave Scope on All and Status on Active, then open the entry. Copy the INCI name, CAS and EC numbers and function into your register, then follow any Annex / Ref # through to the conditions. Before printing, check the name against the current glossary decision, (EU) 2025/1175. CosIng is the index; the glossary and the annexes are the law.

Key takeaways

  • CosIng is free and needs no login, but the Commission says it has informative purpose and no legal value.
  • Search with a name fragment, the Latin plant name or the CAS number. A trade name will never return a result, and an empty result is not a clean bill of health.
  • Capital letters are inventory ingredients; lower-case names are annex substances. METHYL ALCOHOL is the ingredient, Methanol in Annex III/52 is the rule.
  • The Annex / Ref # is the field that matters. Click through and read the product type, maximum concentration and warnings.
  • Botanicals need the exact plant part and process: LAVANDULA ANGUSTIFOLIA OIL and LAVANDULA ANGUSTIFOLIA FLOWER OIL are different entries.
  • Check printed names against Implementing Decision (EU) 2025/1175, and check GB annex status separately on legislation.gov.uk.

A typical example from our inbox: a founder sends a spreadsheet of fourteen ingredients with a note: "All checked on CosIng, all fine." Twelve are fine. One is a supplier's emulsifier, listed by its trade name, which CosIng has never heard of, and the empty result has been taken as good news. The other is an aloe ingredient, matched to the leaf extract entry when the specification describes leaf juice. Neither is dangerous. Both mean reprinting a label that has already gone to the printer.

That is the usual pattern. Nobody misuses CosIng on purpose. They just use it like a search engine, take the first result and stop. This walkthrough shows how to use CosIng properly: what to type, which filters to set, how to read the entry you land on, and where the database stops being able to help. If you want the background first, our guide to what INCI stands for and who assigns the names covers the naming system itself, and our guide to cosmetic ingredient lists covers how to put the list in order once you have the names. This article is about the lookup.

Before you start: what CosIng is, and what it is not

CosIng is the European Commission's free, public database of cosmetic ingredients and substances. No account, no login. It brings together three things: the inventory of ingredient names, the substances listed in the annexes to Regulation (EC) No 1223/2009, and references to opinions of the Scientific Committee on Consumer Safety (SCCS). It holds data back to the 1976 Cosmetics Directive, which is why some records are marked "not active".

Two sentences from the Commission's CosIng page are worth pinning above your desk. CosIng "has informative purpose and no legal value". And an ingredient with an INCI name in the inventory is not thereby approved for cosmetic use. The legal labelling name is the common ingredient name in the glossary adopted under Article 33, currently Implementing Decision (EU) 2025/1175, which has applied since 30 July 2026. The rules on what you may use sit in the annexes. CosIng is the index that points you to both.

One small trap: CosIng's own pages lag behind the law. When we checked in November 2026, the main CosIng page still described the glossary as established by Decision (EU) 2019/701, and the Commission's user guide, last published in July 2023, still names Decision (EU) 2022/677. The glossary page lists the full chain, with 2025/1175 at the top. Treat the decision in force as the reference, not the date on a help page.

Step 1: gather what you know before you type

Have the supplier's documents open before you open CosIng. You want three things for each material: the chemical or botanical name from the specification or safety data sheet, the CAS number, and the EC number if there is one. The marketing brochure is not a source. Trade names go in your register, not in the search box.

If all you have is a trade name, stop here and email the supplier. Ask for the composition with the INCI name, CAS number and approximate proportion of each component. CosIng catalogues ingredients and substances, not commercial products, so "SilkEmul 300" will return nothing, and nothing is not the same as fine. That was exactly the mistake in the spreadsheet above.

Step 2: run a quick search

The search sits on the CosIng home page. At the time of writing it has a Name field, a CAS/EC # field, and two filters, Scope and Status. The Commission does redesign the interface from time to time, so if a label has moved, look for the same four ideas.

Field on the search pageWhat to put in itOur advice
NameAny name for the material: INCI, chemical or IUPAC name, INN, Ph. Eur. name, or words from the description. At least 3 charactersStart with a distinctive fragment rather than the full name. Tick "Spelling not exact" if nothing comes back
CAS/EC #The CAS number or EC (EINECS/ELINCS) number from the supplier's SDS or specificationThe cleanest route for a single defined substance. Type it exactly, hyphens included
ScopeAll, Inventory of Ingredients, Prohibited (Annex II), Restricted (Annex III), Colorants (Annex IV), Preservatives (Annex V) or UV filters (Annex VI)Leave it on All for a first look, so you see both the ingredient and any annex entry
StatusAll, Active or Not activeUse Active for current information. Switch to All only when you are tracing an old name or an old rule

A few things we have learned from doing this many times a week:

  • Use a fragment, not a sentence. "Butyrospermum" finds every shea entry. "Shea butter (organic, refined)" finds nothing.
  • Search the Latin name for plants. Common English names sometimes work and often do not. "Lavandula angustifolia" is reliable; "lavender" is a gamble.
  • Use the CAS number for single chemicals, and double-check it if it returns nothing. A transposed digit is the most common cause of an empty result.
  • Do not use the CAS number alone for botanicals. One CAS number can be shared by several extracts, oils and waters from the same plant, so it narrows the search without settling which entry is yours.

Results come back as a list with columns for INCI Name/Substance Name, CAS No., EC No. and Annex / Ref #. Click the name to open the full entry.

Capitals and lower case are telling you something

This is the detail almost nobody explains. In CosIng, names in capital letters are ingredients from the inventory. Names in lower case are substances listed in the annexes of the Regulation. Methanol is a good illustration. Its ingredient name, and its entry in the 2025 glossary, is METHYL ALCOHOL, the name you would print. In Annex III the same material appears as the substance Methanol. The Commission's own Guide to Consulting CosIng uses methanol as its worked example: entry 52 of Annex III, where it is permitted as a denaturant for ethanol and isopropyl alcohol up to 5% (calculated as a percentage of the ethanol and isopropyl alcohol).

The guide adds that the cross-references CosIng draws between ingredients and annex substances are not binding. So the link from an ingredient to an annex entry is a helpful pointer, not proof that it is the only entry that applies, or that one applies at all.

Step 3: read the ingredient entry properly

An ingredient entry is short, and most people read only the first line. Read all of it, and copy the useful parts into your register while it is on screen.

Field you will seeWhat it tells youWhat it does not tell you
INCI NameThe ingredient name as held in the inventoryWhether that exact name is in the current legal glossary. Check the decision for anything you are about to print
DescriptionWhat the material is, in words, especially useful for botanicals and polymersGrade, purity or which supplier's version you bought
CAS # and EC #Identifiers to copy into your raw material registerThat your supplier's material really is that substance. Match it against the SDS
FunctionsThe functions recorded for the ingredient, such as skin conditioning or emulsifyingPermission to use it for that function. A preservative function in the inventory is not an Annex V listing
Cosmetics Regulation provisionsAny annex entry linked to the ingredient, shown as an Annex / Ref # such as III/52The conditions themselves. Click through to the substance entry or read the annex
SCCS opinionsLinks to published opinions of the Scientific Committee on Consumer SafetyWhether the Commission has acted on an opinion yet. An opinion is advice, not law

Two fields cause most of the confusion. Functions is a description of what the ingredient is commonly used for. It is not a permission. A material recorded with a preservative function can still be absent from Annex V, and in that case you cannot use it as your preservative. Cosmetics Regulation provisions is the field that matters for compliance, and the Annex / Ref # inside it is your link to the actual rule.

Some fragrance materials carry a note that the name is "not officially an INCI Name but Perfuming Name". Take that as a prompt to check how the material is declared in the current glossary before it goes anywhere near a label.

Every entry page has a PDF icon at the top right. Save the PDF with the date in the file name. When someone asks in two years why you labelled a material the way you did, that PDF is your answer.

Step 4: follow the Annex / Ref # all the way to the conditions

An annex reference is written as the annex number and the entry number, such as III/52. Click it, or search the substance, and read the whole substance entry. For a restricted substance that means the product type and body parts, the maximum concentration in the ready-for-use preparation, any other limits, and the wording of conditions of use and warnings. Our article on restricted ingredients and Annex III explains how to read those columns, and our guide to the cosmetic annexes covers what each annex is for.

What the entry showsWhat it means for your formulaYour next step
No annex referenceThe ingredient is not linked to a specific annex entry in CosIngSearch the substance side by CAS number too, and leave safety to the assessor
II/...The substance is on the prohibited listStop. Check you have the right material, then reformulate
III/...Allowed only within the conditions in that entry: product type, maximum concentration, other limits, warningsRead every column of the entry and compare it with your product type and percentage
IV/..., V/... or VI/...Allowed as a colorant, preservative or UV filter on the conditions listedConfirm your use matches the listed function and limits. These are positive lists
Not activeHistorical information: an old name, or an old version of a ruleFind the active record. Do not build a label or a CPSR on a not active entry

Three things to keep in mind when you read the result:

  • Annexes IV, V and VI are positive lists. CosIng's main page says that, for colorants, preservatives and UV filters, it lists only those authorised in Annexes IV, V and VI. If your material is doing one of those jobs and it is not there, you cannot use it for that job. See our posts on preservatives, UV filters and colorants and CI numbers.
  • Salts and esters can be caught without being named. Many entries cover a substance "and its salts" or esters. For cross-references, the guide says CosIng uses the Annex V preamble definitions of salts and esters unless an entry says otherwise. So a sodium salt with no reference of its own can still fall under its parent acid's entry. Search the parent too.
  • Prohibited substances are in CosIng on purpose. Finding a material in the database tells you nothing on its own. Finding it with a II reference tells you to stop. Our article on banned ingredients and Annex II has the detail.

And no annex reference means only that the material is not specifically controlled by name. Whether it is safe in your product, at your concentration, for your use, is the job of the safety assessment in your CPSR.

Step 5: confirm the name against the glossary before you print

Once you have the name from CosIng, check it in the glossary decision if it is going on a label, especially for anything new, botanical or recently renamed. Article 19(6) asks for the common ingredient name from the glossary, and only where there is none for a name from a generally accepted nomenclature such as INCI. The 2025/1175 annex, linked from the Commission's glossary page, is a long document, but it is searchable, and a quick Ctrl+F on the name you plan to print takes seconds.

This is where botanicals bite. The 2025 glossary has separate entries for LAVANDULA ANGUSTIFOLIA OIL, LAVANDULA ANGUSTIFOLIA FLOWER OIL and LAVANDULA ANGUSTIFOLIA FLOWER/LEAF/STEM OIL. For aloe it lists ALOE BARBADENSIS LEAF JUICE, ALOE BARBADENSIS LEAF EXTRACT and ALOE BARBADENSIS LEAF JUICE POWDER. They are different materials with different names, and the right one is whichever matches the plant part and process on your supplier's specification. If the specification does not say, ask. That is the aloe mistake from the start of this article.

The Commission's glossary page also notes that the glossary is not exhaustive. A genuinely new ingredient may have an INCI name that has not reached a glossary decision yet. In that case the INCI name is the fallback, and you should keep the supplier's confirmation of it on file.

Advanced search: four fields worth knowing

Most lookups never need the Advanced Search page, but four of its fields earn their place:

  • CAS # and EINECS / ELINCS / EC #. These match the exact number, which makes them good for confirming an identity once you have a candidate.
  • Function. Set Type to Ingredient and you can list every ingredient recorded with a given function. Useful when a formulator asks what else could do a job, though the list still needs an annex check.
  • Annex and #. Set Type to Substance and you can go straight to a known entry, for example Annex III and 52.
  • Proposed. Shows proposed updates to the inventory published for comment before they are finalised. Worth a look if a supplier tells you a name is "about to change".

Search results can be exported as XLS or CSV, which is handy when you are checking a whole raw material list. Under Reference data you will also find the list of annexes, the list of functions with their definitions, and a list of the abbreviations used in INCI names, such as PEG, PPG, MEA and TEA. When a customer asks what "Cocamide MEA" means, that list is the starting point.

When CosIng does not give you a straight answer

Blends. An emulsifier package, a preservative system or a texture complex is several ingredients sold under one reference. Look up each component, never the blend, and build both the label and the annex check from the components.

Fragrance. You do not look up a fragrance compound at all. It goes on the label as Parfum, followed by any Annex III allergens present above 0.001% in leave-on or 0.01% in rinse-off products. The work is a supplier conversation: get the allergen declaration and the IFRA certificate, and give your assessor what they need. Our guides to labelling fragrance allergens and INCI names and CAS numbers for perfumery materials cover the fragrance side.

Nothing found. Try a shorter fragment, tick "Spelling not exact", try the CAS number, and set Status to All in case the name has changed. If there is still nothing, ask the supplier for the INCI name in writing and how it was assigned. A supplier selling into cosmetics that cannot give you an INCI name is a supplier to question before you formulate with them.

An entry with a red star. The guide explains that some substances in CosIng have not been published in the Official Journal. They are marked with a red star in lists and may carry a default Annex / Ref # pointing at related published substances. Read the annex itself before relying on one of these.

Selling in Great Britain? CosIng is only half the check

CosIng reflects EU law. Great Britain runs its own version of the Regulation, and since 2021 EU amendments to the annexes have not applied there automatically. GB changes its annexes through its own statutory instruments. The GB version of Annex III on legislation.gov.uk, for example, shows amendments made by the Cosmetic Products (Restriction of Chemical Substances) Regulations 2022, 2024 and 2025. A substance can therefore be restricted on different terms, or on a different timetable, in Great Britain and the EU.

So for a GB product, use CosIng to find the substance and its entry number, then read the matching entry in the GB annexes. OPSS guidance on the GB Regulation and the GOV.UK page on making cosmetic products available in Great Britain are the official reference points. Northern Ireland follows the EU Regulation under the Windsor Framework, so the UK is not one picture here. Our post on Northern Ireland and CPNP explains that split. Ingredient names rarely differ between the two, but annex status can.

Make the lookup once, and write it down

The time-wasting version of CosIng is looking up the same twenty materials every time you launch a product. Do it once per material, properly, and record it. Your raw material register should have, for each material: supplier and trade name, glossary or INCI name, CAS and EC numbers, function, Annex / Ref # for the EU and for GB, the date you checked, the saved entry PDF, and which of your products contain it.

That last column is what turns a regulatory change from a panic into a filter. When an annex entry is amended, you search the register for the CAS number and you have your list of affected products in a minute. Re-check anything carrying an annex reference whenever the annexes change. Then print only the glossary or INCI name: the trade name is for your records, and the ingredient list is a legal declaration. Our guide to compliant labels, INCI and claims covers how that declaration fits with the rest of the pack.

Want the whole formula checked, not one material at a time?

Send us your formula with percentages and the supplier documents you hold. We look up every material, confirm the glossary or INCI name, record the CAS and EC numbers, follow every annex reference through to its conditions for the EU and for Great Britain, and tell you exactly what has to change on the label or in the formula before you notify.

Book a restricted ingredient check Label and packaging review

Related reading

Myths we hear

  • If it is in CosIng, I can use it. CosIng deliberately includes prohibited substances so you can find out that they are prohibited. The Annex / Ref # tells you whether and how a material may be used.
  • No result means no restriction. No result usually means the wrong search term, most often a trade name. Search the components by name fragment or CAS number before drawing any conclusion.
  • The Functions field tells me what I am allowed to use it for. Functions describe common uses. Preservatives, colorants and UV filters must be listed in Annexes V, IV or VI respectively, whatever the inventory says.
  • CosIng is the legal list of label names. The legal labelling names are in the glossary decision, currently Implementing Decision (EU) 2025/1175. CosIng is the search tool that points to it.
  • One CAS number means one INCI name. Botanicals often share a CAS number across extracts, oils, waters and powders. Match the plant part and process on the specification.
  • A CosIng check covers the whole UK. CosIng reflects EU law, which applies in Northern Ireland. Great Britain amends its own annexes, so check the GB entry too.

What to do this week

  1. Collect the specification and SDS for every raw material, and note the chemical or botanical name, CAS number and EC number.
  2. Ask suppliers for the component INCI names and CAS numbers of any blend or trade-named material.
  3. Run each material through the CosIng quick search with Scope on All and Status on Active.
  4. Copy the INCI name, identifiers, function and any Annex / Ref # into your register, and save the entry PDF with the date.
  5. Follow every annex reference to the full entry and compare product type, maximum concentration and warnings with your product.
  6. For salts and esters with no reference of their own, search the parent substance too.
  7. Check each name you will print against Implementing Decision (EU) 2025/1175.
  8. If you sell in Great Britain, read the matching entry in the GB annexes on legislation.gov.uk.

Frequently asked questions

What is CosIng used for?

CosIng is the European Commission's public database of cosmetic ingredients and substances. You use it to find the INCI name of a material, its CAS and EC numbers and functions, any annex entry that restricts it, and related SCCS opinions. It is free and needs no login.

How do I search CosIng?

Use the quick search on the home page. Type at least three characters of a name, or the CAS or EC number, into the matching field. Leave Scope on All and Status on Active for current information, then click the name in the results to open the full entry.

Why does CosIng return no result for my ingredient?

Most often because you searched a supplier's trade name. CosIng lists ingredients and substances, not commercial products. Try the chemical or Latin plant name, a shorter fragment, the CAS number, or tick Spelling not exact, and ask the supplier for component INCI names.

What does Annex / Ref # mean in CosIng?

It points to an entry in the annexes to Regulation (EC) No 1223/2009, written as annex and entry number, for example III/52 for methanol. II means prohibited, III restricted, and IV, V and VI the permitted colorants, preservatives and UV filters.

Why are some CosIng names in capitals and others in lower case?

Capitals are ingredients from the inventory, the names used on labels. Lower case marks substances listed in the annexes of the Regulation. Methanol, for example, is the ingredient METHYL ALCOHOL and the Annex III substance Methanol.

Is CosIng legally binding?

No. The Commission says CosIng has informative purpose and no legal value. Labelling names come from the glossary decision, currently Implementing Decision (EU) 2025/1175, and conditions of use come from the annexes to the Regulation.

What does Not active mean in CosIng?

It marks historical information, such as an old ingredient description or a past version of a rule. CosIng holds data back to 1976. Use the Active record for current labels and safety assessments.

Can I use CosIng for products sold in Great Britain?

For names, largely yes. For restrictions, no. Great Britain amends its own annexes by statutory instrument, so check the GB entry on legislation.gov.uk. Northern Ireland follows the EU rules that CosIng reflects.

Official sources and legislation

S
Written by

Syed Muhammad Shamuel Shees

Founder & Lead Compliance Consultant

Phoenix Safety Consultants is a cosmetic compliance consultancy with offices in London, Tallinn and Pensacola. Our safety assessors and toxicologists prepare CPSRs, Toxicological Risk Assessments, PIFs, SDSs and UK/EU notifications for brands of every size. Talk to the team on WhatsApp or at compliance@phoenixcosmeticsafety.com.

Join the conversation