In this article
The short answer
To change your EU Responsible Person, set a cut-over date first. Units first supplied before it stay the outgoing Responsible Person's, with its address on the pack and its Product Information File behind them. Units supplied after it need the incoming one's name and address on the label and its own file. The outgoing provider copies the CPNP products across, and the incoming one completes and submits them. What to do with old-address stock is a judgement, not a published rule, so agree it in writing.
Key takeaways
- The CPNP copy is the quick part. The decision that matters is the cut-over date, because it decides which Responsible Person each unit belongs to.
- Article 19 needs the Responsible Person's name and address on the container and the packaging, so a new Responsible Person means new artwork, and the SAAS organisation name should match it.
- We know of no published rule for stock already carrying the old address. Selling it through is defensible only if the outgoing Responsible Person stays reachable there and keeps its file.
- Stock you still hold has not been placed on the market yet. If it goes out after the cut-over, it needs the new details.
- Under Article 11 each Responsible Person keeps a PIF at its label address for ten years after the last batch it placed, so after a change you have two files to account for.
- Great Britain needs its own UK Responsible Person and SCPN notification. Northern Ireland sits with your EU arrangements.
A brand once came to us with the CPNP side of a change of Responsible Person finished in an afternoon. The outgoing provider had copied every product across, the drafts were completed and submitted, and everyone thought the job was done. Then a German retailer asked why the cartons in its warehouse named a company in Ireland that, according to the brand's own website, no longer represented it. Nobody had decided what happened to the stock already out there, or who would keep the file for it. (This is a composite of situations we see, not a single client.)
That is the pattern. Moving the record is quick. Changing your EU Responsible Person properly means deciding when responsibility moves, what the pack says either side of that moment, and where the Product Information File sits for each batch. This guide covers those decisions. For the click-by-click CPNP copy, our guides to CPNP login, roles and access and to who notifies and who controls your data already walk through it, and we only summarise it here.
Start with the cut-over date
Everything in a change of Responsible Person hangs off one date: the point from which product is placed on the market under the new entity. Under Article 2 of Regulation (EC) No 1223/2009, placing on the market means the first making available of a product on the EU market, and Article 4(2) makes the Responsible Person answerable for each product it places there.
Our reading, and it is a reading rather than something the Regulation spells out for this situation, is that the change splits your stock in two. Units first supplied into the EU market before the cut-over went out under the outgoing Responsible Person. Units first supplied after it go out under the incoming one. Once you look at it that way, most of the awkward questions answer themselves:
| Units first supplied before the cut-over | Units first supplied after the cut-over | |
|---|---|---|
| Responsible Person | The outgoing Responsible Person | The incoming Responsible Person |
| Name and address on the pack | The outgoing one's, as printed | The incoming one's |
| Product Information File | Kept by the outgoing one at its label address, for ten years after the last batch it placed (Article 11) | Kept by the incoming one at its label address |
| CPNP record | The original notification, which stays in the outgoing organisation, marked as copied | The new notification, with a new CPNP reference, in the incoming organisation |
| Authority questions about these units | Go to the address on the pack, so the outgoing one | Go to the incoming one |
Pick a real date, write it into the agreements with both providers, and make sure your warehouse or importer knows it. "Sometime in the spring" is how brands end up with two companies each assuming the other is covering a batch.
What has to change on the pack
Article 19(1)(a) says a cosmetic product may only be made available where the container and the packaging carry the name or registered name and address of the Responsible Person. A new Responsible Person therefore means new artwork, and for a range with dozens of shades the artwork is usually the slowest part of the whole change. A few details trip people up:
- Both container and outer packaging. The name and address go on the tube or jar as well as the carton, so check every printed component, not just the box.
- Abbreviation is allowed, within limits. Article 19 lets you shorten the details only so far as the person and the address can still be identified.
- More than one address. If the pack carries several, the one where the Responsible Person keeps the Product Information File readily available has to be highlighted.
- Imported products still need the country of origin, whoever the new Responsible Person is.
- The name should match the CPNP. The CPNP FAQ says the organisation name in SAAS must correspond to the Responsible Person details visible on the labelling. If your incoming provider trades under one name and is registered under another, sort out which appears on the pack before you print.
- Stray references to the old provider. Website addresses, contact emails and small print on a carton flap are easy to miss.
While the artwork is open, check everything else too. It is the cheapest moment to fix an unrelated label fault. Our label review checklist and our note on net quantity, batch codes and the Responsible Person address cover what to look at.
Distributors check this too. Article 6(2) requires them to verify, before they make a product available, that the Responsible Person's name and address are on the label. A retailer who has been told you changed provider may reasonably ask why the pack says otherwise, so the cut-over date and the stock position need to be written down somewhere you can send them.
Stock that already carries the old address
This is the question we get most, and the honest answer is that there is no published rule for it. Regulation 1223/2009 does not say what happens to packs carrying the outgoing Responsible Person's details when the role changes, and we have not seen Commission guidance that does. What follows is how we reason it through with clients, and it is a judgement you should agree with your incoming Responsible Person before you set the date.
Units already in the supply chain
Stock already sold to distributors and retailers before the cut-over was placed on the market under the outgoing Responsible Person, and its label is accurate for those units. In practice it usually sells through rather than being recalled. That position only holds up if three things are true:
- The outgoing Responsible Person is still reachable at the address printed on those packs.
- It keeps the Product Information File for those units available there, as Article 11(3) ties the file to the address on the label.
- Its exit terms say it will deal with an authority request or a complaint about those units.
If the outgoing provider is closing down, refusing to cooperate or simply unreachable, the old address points at nothing, and selling through becomes much harder to defend. That is a conversation to have with your incoming Responsible Person and, if necessary, the competent authority, rather than something to assume.
Stock you still hold
Packs sitting in your own warehouse, or your importer's, that nobody has supplied yet are a different matter. They have not been placed on the market, so if they first go out after the cut-over they go out under the new Responsible Person and should carry its details. Either relabel them, use them up before the cut-over date, or move the date. Stock in a marketplace fulfilment centre that you still own is the grey area; raise it specifically with your incoming Responsible Person.
Can you use a sticker?
The Regulation does not mention over-labelling. What Article 19 does demand is that the information is indelible, easily legible and visible. A sticker that peels off in the hand, or hides another mandatory item such as the batch code or the ingredient list, fails that test. A well-made over-label on the container and the outer pack is a common route for held stock, but it is another judgement to agree with the incoming Responsible Person, not a box to tick.
Two addresses, two files: the PIF after the change
Article 11 says the Responsible Person keeps the Product Information File for ten years after the last batch was placed on the market, and makes it readily accessible at its address on the label. After a change you have two addresses on packs in circulation, so in effect you need two files.
The incoming Responsible Person needs the complete file for the units it will place on the market. It also has to be satisfied with it. Article 10 puts the duty to ensure a proper safety assessment and an up-to-date safety report on the Responsible Person, so a careful provider will read the CPSR before accepting the role rather than inherit a folder unseen. If the report is thin or out of date against current annex entries, the change turns into a remediation project. Find that out before you set the date, not after. Our guide to what goes in the PIF and what goes in the CPSR and our PIF checklist are useful for the review.
The outgoing Responsible Person, meanwhile, still needs a file for the units it placed, at its own address, for the full retention period. Make sure your exit terms say so, and keep your own copy of everything in case the provider later disappears.
If a contract manufacturer holds the formula, settle early how the incoming Responsible Person will get the formulation detail it needs. Our article on CPSRs when the brand does not hold the formula covers the usual arrangements.
The CPNP part, briefly
The Commission user guide describes an Admin option called "Copy your products to another Responsible Person". Only a user in the outgoing Responsible Person's main organisation can run it; sub-organisations do not see the option. The copies arrive with the incoming Responsible Person as drafts, with new CPNP references. Everything is copied except the packaging and labelling information and the contact person details, so the incoming Responsible Person adds its own contact person and the new label images, which Article 13(2) requires once the product is placed on the market, and then submits. The originals stay in the outgoing organisation, unaffected apart from an icon showing they were copied.
Three points matter for the cut-over:
- Nothing is deleted. A submitted notification cannot be deleted, only updated, and the CPNP FAQ explains that authorities and poison centres must still be able to find products marketed under a former Responsible Person's name. The old record staying visible is the system working, not a duplicate to clean up.
- The new references go to whoever asked for the old ones. The CPNP number is not one of the Article 19 label items, but retailers and marketplaces often record it.
- No copy means a fresh notification. If the outgoing provider will not run the copy, the incoming Responsible Person notifies again from your data. Slower, but not a dead end, provided you kept your own records.
One thing that looks similar but is not: if your own EU company is renaming or moving country, the CPNP FAQ treats that as a new organisation plus a copy, and a name change made the wrong way can make the portal read-only. Our access guide covers that trap, and CPNP login not working? explains why products can seem to vanish mid-change.
Who needs to hear about the change
- Distributors who translated your labels. Under Article 13(3) they submit their own information, including the Responsible Person's name and address, and the user guide links their distribution notification to the original product notification. Give them the new reference and the date so they can update theirs.
- Retailers and marketplaces. Send the incoming Responsible Person's details, the cut-over date and your position on existing stock, before they find the mismatch themselves.
- Customer service. Complaints and possible reactions need to reach the right Responsible Person. Under Article 23 the Responsible Person and distributors must report serious undesirable effects without delay, so agree who handles reports about units sold before the cut-over. Our cosmetovigilance guide sets out the process.
- Your manufacturer and designer. They need the artwork change and, where relevant, a route for formulation data to reach the new provider.
Great Britain and Northern Ireland
Great Britain is a separate system. GOV.UK guidance says a Responsible Person needs a UK established address to make cosmetics available in GB, with its own notification through the Submit Cosmetic Product Notifications service. Changing your EU Responsible Person does nothing to your UK one, and vice versa. If your pack carries both addresses, though, the artwork change touches both, so check the UK block is still right while you are at it.
Northern Ireland follows the EU side: the same GOV.UK page notes that for NI the Responsible Person must be established in NI or the EU. A change of EU Responsible Person can therefore affect product you sell there. Our guide to selling cosmetics in Northern Ireland and our UK vs EU Responsible Person comparison go into the detail.
A cut-over plan that works
We do not put durations on this, because they depend on your artwork, your print runs and the state of your files. The order matters more than the timing:
| Stage | What happens | Who does it |
|---|---|---|
| Before you sign | Collect the product list with CPNP references; send the Product Information Files for review; agree the cut-over date and the stock position in writing | Brand, incoming Responsible Person |
| Mandate | Written mandate, accepted in writing (Article 4); exit terms with the outgoing provider covering the CPNP copy, file retention and authority requests | Brand, both Responsible Persons |
| Artwork | New name and address block on every container and outer pack; full label check while the artwork is open | Brand, designer, incoming Responsible Person |
| CPNP | Outgoing copies the products; incoming adds the new label images and its contact person, then submits | Both Responsible Persons |
| Cut-over | Units first supplied from this date carry the new details; stock that is not yet on the market is relabelled or held back | Brand, warehouse, importer |
| Afterwards | Distributors, retailers and customer service told; outgoing keeps its file available for its units; both sides keep copies | Everyone |
The one rule we would not bend: never let the outgoing arrangement end before the incoming Responsible Person has accepted the role in writing. Article 4(1) only allows a product on the market if a Responsible Person is designated for it, so a gap between the two contracts is a gap in compliance. Choosing a new provider? Our guide to evaluating a regulatory partner lists the questions to ask, and if you are weighing up holding the role yourself, read can I be my own Responsible Person? first.
Changing your EU Responsible Person this year?
Send us your product list with CPNP references, the artwork that carries the current name and address, and the date you have in mind. We will map out the cut-over: what the outgoing Responsible Person has to do in the CPNP, what changes on the pack, how to handle stock already in the market, and what the Product Information File needs before we, or anyone else, can accept the role.
Talk to us about the EU Responsible Person role Label and packaging review
Related reading
- CPNP and the Responsible Person: who notifies, who is liable, who controls your data
- CPNP login and access: EU Login, SAAS roles and who should hold the keys
- CPNP login not working? Error-by-error fixes
- Do you need an EU Responsible Person?
- How to evaluate a regulatory partner for CPSR and Responsible Person services
- Cosmetic label review checklist
- PIF vs CPSR: what goes where, and who keeps it
- Selling cosmetics in Northern Ireland: CPNP and the Windsor Framework
- All regulatory compliance articles
Myths we hear
- Once the CPNP products are copied, the change is done. The copy moves the record. The label, the stock already in the market and the Product Information File at each address are separate jobs, and they usually take longer.
- Every pack with the old address has to be recalled. Nothing in the Regulation says so, and we know of no published guidance that does. Units placed on the market under the outgoing Responsible Person can usually sell through, provided it stays reachable at that address and keeps the file for them. Agree this in writing.
- Stock in our warehouse counts as already on the market. Placing on the market is the first supply into the EU market. Packs nobody has been supplied with yet go out under whoever is Responsible Person on the day they leave.
- The old CPNP notification should be deleted to avoid duplicates. Submitted notifications cannot be deleted, and authorities need to find products sold under the former Responsible Person's name. The copied original staying visible is normal.
- Changing the EU Responsible Person also covers the UK. It does not. Great Britain has its own Responsible Person, notification and file. Northern Ireland follows the EU side.
What to do this week
- List every product and variant you sell in the EU, with its CPNP reference and the organisation that holds it.
- Pick a cut-over date and write it into the agreements with both Responsible Persons.
- Count the stock in your own and your importer's warehouses that will still be unsold on that date, and decide whether to relabel, use it up first or move the date.
- Send the Product Information Files to the incoming Responsible Person for review before you commit to print.
- Brief your designer on the new name and address block for every container and outer pack, and check the SAAS organisation name matches.
- Confirm in writing that the outgoing Responsible Person will run the CPNP copy and keep its file available for units already sold.
- Draft one short notice for distributors, retailers and marketplaces with the new details, the date and your position on existing stock.
- If you sell in Great Britain or Northern Ireland, check what the change means for each separately.
Frequently asked questions
Do I have to relabel stock on shop shelves when I change Responsible Person?
Regulation 1223/2009 does not say so, and we know of no published guidance that does. Units placed on the market under the outgoing Responsible Person usually sell through, as long as it stays reachable at the printed address and keeps the file for them. Agree that position in writing.
What is a cut-over date for a Responsible Person change?
It is the date from which product is placed on the market under the new Responsible Person. Units first supplied before it belong to the outgoing one, units after it to the incoming one. Setting it clearly is what stops two companies each assuming the other covers a batch.
What about stock still sitting in our warehouse?
If nobody has been supplied with it yet, it has not been placed on the market. When it goes out after the cut-over, it goes out under the new Responsible Person and should carry its name and address, so relabel it, use it up before the date, or move the date.
Who keeps the PIF for products sold before the change?
The outgoing Responsible Person, at the address printed on those packs. Article 11 requires the file for ten years after the last batch was placed on the market. The incoming Responsible Person keeps its own file for the units it places. Write the outgoing side's duty into your exit terms.
Can I put a sticker with the new address over the old one?
The Regulation does not mention stickers. It requires the details to be indelible, easily legible and visible, so an over-label must stay put and must not hide other mandatory information such as the batch code. Agree the approach with your incoming Responsible Person first.
Does my CPNP number change when I change Responsible Person?
Yes. The copied products arrive in the new organisation with new CPNP references, and the originals stay with the outgoing Responsible Person, marked as copied. The number is not a required label item, but tell retailers and distributors who recorded the old one.
Will the new Responsible Person redo my safety assessment?
Not automatically. Article 10 makes it the Responsible Person's job to ensure there is a proper safety assessment and an up-to-date report, so a careful provider reviews your CPSR before accepting the role. If it is out of date or incomplete, expect it to be updated first.
Does changing my EU Responsible Person affect the UK?
Not Great Britain, which needs its own UK Responsible Person and SCPN notification. Northern Ireland is different: GOV.UK says the Responsible Person for NI must be established in NI or the EU, so a change of EU Responsible Person can affect product you sell there.
Official sources and legislation
- Regulation (EC) No 1223/2009, Article 2: definitions of placing and making available on the market (as adopted, legislation.gov.uk)
- Regulation (EC) No 1223/2009, Article 4: Responsible Person and written mandate (as adopted, legislation.gov.uk)
- Regulation (EC) No 1223/2009, Article 5: obligations of Responsible Persons (as adopted, legislation.gov.uk)
- Regulation (EC) No 1223/2009, Article 6: obligations of distributors (as adopted, legislation.gov.uk)
- Regulation (EC) No 1223/2009, Article 10: safety assessment (as adopted, legislation.gov.uk)
- Regulation (EC) No 1223/2009, Article 11: Product Information File (as adopted, legislation.gov.uk)
- Regulation (EC) No 1223/2009, Article 13: notification (as adopted, legislation.gov.uk)
- Regulation (EC) No 1223/2009, Article 19: labelling (as adopted, legislation.gov.uk)
- Regulation (EC) No 1223/2009, Article 23: serious undesirable effects (as adopted, legislation.gov.uk)
- European Commission: Guide to using CPNP for Responsible Persons and distributors (PDF, 18 March 2026)
- CPNP frequently asked questions (Responsible Person data, organisation names, former Responsible Persons)
- European Commission: Cosmetic Products Notification Portal (CPNP)
- GOV.UK: Making cosmetic products available to consumers in Great Britain
Join the conversation