Passer au contenu
Qualified safety assessorsUK · EU · USA
Get a quote
  1. Home
  2. BLOGS
  3. Fragrance Allergen Breakdown Request: A Supplier Template and How to Check the Reply

Fragrance Allergen Breakdown Request: A Supplier Template and How to Check the Reply

The email to send, the seven things the reply must contain, and how to tell a usable breakdown from one that will not survive an inspection

S Syed Muhammad Shamuel SheesFounder & Lead Compliance Consultant
13 min read
Reviewed by Phoenix Cosmetic Safety · Nov 18, 2026
A woman at her office desk holding a perfume bottle while using a smartphone.

The short answer

Ask your fragrance supplier in writing for a dated allergen statement for the named compound, prepared against Annex III as amended by Regulation (EU) 2023/1545, giving each declarable allergen by its glossary name with CAS number as a percentage of the compound, the reporting limit used, and citral and benzyl salicylate figures for the 2027 limits. An IFRA certificate or a safety data sheet does not answer that question.

Key takeaways

  • Name the document and its fields. A vague request for allergen information brings back whatever sheet already exists.
  • Ask for the list as amended by Regulation (EU) 2023/1545 rather than a number. Annex III has 81 entries with the labelling condition, not 82.
  • Work out your reporting limit: the finished-product threshold divided by your fragrance dose. An eau de parfum at 20% needs everything from 0.005% of the compound.
  • Ask for citral and benzyl salicylate figures in the same email, because product-type maximums apply from 1 January 2027 under Regulation (EU) 2026/909.
  • Reject undated sheets, sheets on the 26-allergen basis, finished-product figures at someone else's dose and "none present" claims without a reporting limit.
  • The IFRA certificate and the SDS are separate documents with separate jobs. Ask for each by name and file them apart.
  • Chase at one, two and three weeks, keep every email, and add a data clause to your supply contract at renewal.

Here is a request we see all the time: "Hi, can you send the allergen info for Fig Leaf 2?" And here is what usually comes back: a one-page sheet from 2021 listing six of the original 26 allergens, no reporting limit, no reference number. The supplier has done nothing wrong. They sent the document that already existed, because that is what the question asked for.

The fix is in the request. Ask for a specific document with specific fields, give a date, and you get something you can file. This guide is the request itself: the wording to send, what the reply must contain, and how to check it when it lands. If you need the background first, our explainer on what fragrance allergens are covers the list, our guide to the EU labelling change covers the dates and the worked label example, and our per-SKU deadline checklist covers the audit you run once the documents are in.

You will often hear this called an "82-allergen breakdown". That figure is the original 26 plus the 56 additions, but two of the 26 were already banned, and the amended Annex III has 81 entries carrying the labelling condition. Do not put a number in your request at all. Ask for the list "as amended by Regulation (EU) 2023/1545" and let the supplier confirm the basis on the document. That wording stays correct whatever the count turns out to be after the next amendment.

Why the wording of the request decides what comes back

Fragrance houses hold several documents for every compound: a safety data sheet, an IFRA certificate, a specification, sometimes a certificate of analysis, and an allergen statement. A customer service team that receives "allergen info" will send whichever of these mentions allergens, and that is often the wrong one or an old version of the right one.

Timing matters too. The EU placing-on-the-market date for the expanded list passed on 31 July 2026, so most large suppliers have reissued their statements. The gaps we find now sit in three places: compounds bought from smaller houses or distributors, compounds added to a range since the reissue, and statements that were reissued but leave out what the next change needs. That next change is close. Regulation (EU) 2026/909 gives citral and benzyl salicylate maximum concentrations by product type, and products over those limits cannot be placed on the EU market from 1 January 2027. If you are writing to a supplier anyway, ask for those figures in the same email.

What a usable breakdown contains

Different houses call it an allergen statement, an allergen declaration or a declarable allergen breakdown. The name is not important. These seven fields are:

Field the reply must carryWhy you need it
1. Compound name, supplier reference and formula version or first batch coveredTies the sheet to the material on your invoice. Without it you cannot show which batches the figures apply to
2. Each declarable allergen present, by its common ingredient glossary name, with CAS number and Annex III reference numberThe label has to use the glossary name (Article 19(6)). The reference number shows the supplier worked from the current Annex III
3. Concentration of each as a single percentage of the compoundYour calculation multiplies this by your dose. A range or a finished-product figure at someone else's dose is not usable as it stands
4. Annex III entries that are natural materials in their own right, such as certain essential oils, listed as their own linesThe expanded list names some oils and extracts as entries, alongside the molecules they contain
5. The reporting limit used, and a statement that no other listed allergen is present at or above itTurns silence into a usable negative. Without it, an absent name could mean zero or could mean nobody looked
6. Citral (including geranial and neral) and benzyl salicylate, as figuresBoth get product-type maximum concentrations under Regulation (EU) 2026/909 from 1 January 2027
7. The legal basis, issue date, document reference and the person or function issuing itShows the sheet is current and lets you mark the old one as superseded

Two of these are the ones brands forget. Field 5, the reporting limit, is what lets you rely on an absence. Field 7, the basis, is what lets you tell this year's sheet from the one it replaced. A sheet that only lists substances, with no basis and no date, looks exactly like its predecessor in a file two years later.

On names, Article 19(6) of the Cosmetics Regulation requires the ingredient list to use the common ingredient name from the glossary, so ask for that form and check it against CosIng before anything goes on artwork. Our guide to INCI names and CAS numbers for perfumery materials explains the traps, such as trade names and grouped entries. Citral is the obvious example: the Annex III entry covers citral, geranial and neral, and the label says "Citral".

Work out your reporting limit before you write

This is the step that turns a decent request into a precise one. The labelling threshold applies to the finished product: 0.001% for leave-on, 0.01% for rinse-off. The supplier works in percentages of the compound. To find the lowest level in the compound that still matters to you, divide the threshold by your fragrance dose.

Your productFragrance doseFinished-product thresholdLowest level in the compound that still needs naming
Face cream (leave-on)0.5%0.001%0.2% of the compound
Body lotion (leave-on)1%0.001%0.1% of the compound
Body oil (leave-on)3%0.001%about 0.033% of the compound
Eau de parfum (leave-on)20%0.001%0.005% of the compound (50 ppm)
Shower gel (rinse-off)1%0.01%1% of the compound
Shampoo (rinse-off)2%0.01%0.5% of the compound

Look at the last two leave-on rows. A statement that reports everything at or above 0.1% of the compound is fine for a body lotion at 1% and quietly useless for an eau de parfum at 20%, where anything from 0.005% upwards has to be named. Put the figure for your highest-dose product in the request. If you sell neat perfume oils, that figure is 0.001% of the compound, and you should say so. Our article on how much fragrance you can add covers the dose side if you have not fixed it yet.

The same arithmetic, run the other way, is your citral check. A deodorant has a citral maximum of 0.032% under 2026/909. At a 1% dose, any compound carrying more than 3.2% citral puts the product over the limit, and lemongrass or litsea accords can carry more than that. Knowing the figure before January is worth the extra line in the email.

The request email, ready to send

Send one email per compound, or one per supplier with a table attached if you buy several from the same house. Replace the bracketed parts and keep the rest. The legal references are there on purpose: they tell the person reading it exactly which document to pull.

Subject: Fragrance allergen breakdown request: [compound name], ref [code], reply by [date]

Dear [name],

We buy [compound name], your reference [code], most recently batch [number]. We are updating the Product Information Files and labels of the cosmetic products that use it, and we need a current fragrance allergen breakdown.

Please could you send a dated statement that:

  1. identifies the compound by name, reference and formula version, or the first batch it applies to;
  2. lists each fragrance allergen present that is subject to the labelling condition in Annex III to Regulation (EC) No 1223/2009, as amended by Regulation (EU) 2023/1545, using the common ingredient glossary name, with its CAS number and Annex III reference number;
  3. gives the concentration of each as a single percentage of the compound, rather than a range or a percentage of a finished product;
  4. lists separately any Annex III entry present that is itself a natural material, such as an essential oil or extract;
  5. states the reporting limit used and confirms that no other listed allergen is present at or above it. We need a reporting limit of [your figure]% of the compound or lower;
  6. gives the concentration of citral (including geranial and neral) and of benzyl salicylate, as these have product-type maximums under Regulation (EU) 2026/909 from 1 January 2027;
  7. states the legal basis it was prepared against, its issue date, a document reference and the department issuing it.

Please also tell us whether the composition of this compound has changed since [date of the document we currently hold] and, if it has, from which batch.

We would be grateful to receive this by [date, ten working days from now]. If that date is difficult, please let us know now so we can plan around it.

Kind regards,
[name, company, Responsible Person or brand]

Keep a copy of what you sent and when. If a reply arrives late and a label change slips, a dated request shows you asked for the right thing in good time, which is a very different position from never having asked.

For several compounds, attach a spreadsheet with one row per compound and these columns: supplier reference, compound name, last batch received, date of the statement you currently hold, products and doses it goes into, reporting limit needed. The supplier can see at a glance what you need and why.

Versions for oils, distributors and contract manufacturers

Essential oil suppliers. There is no compound here, so the request is per oil and ideally per batch, because natural oils vary with origin and harvest. Change the first line to "we buy [oil name], batch [number]" and ask for "a certificate of analysis or allergen statement for this batch giving the Annex III fragrance allergens present as percentages of the oil". If only typical values exist, accept them, say so in your file and calculate conservatively. Our safety guide to essential oils in cosmetics covers the wider issues.

Distributors. A reseller holds the commercial relationship, not the data. Add one sentence: "If you do not hold this document, please forward this request to the manufacturer's regulatory department and let us know who it has gone to." Then copy the distributor's technical contact, not just sales.

Contract and private label manufacturers. The usual objection is confidentiality. Frame the request as a request for the allergen statement, not the formula: "We are not asking for the composition of the fragrance, only for the declarable allergen content that the label and the Product Information File require." That removes most of the objection. If the manufacturer still will not pass the data through, remember that it is the Responsible Person who has to hold the evidence behind the label under Article 11, so this needs settling at contract level rather than left as a favour.

Checking the reply line by line

When the statement arrives, run it through these checks before anyone does a calculation from it. Each one takes seconds and each one catches something we see regularly.

What you see in the replyAccept?What to send back
Basis given as the 26 allergens, Directive 2003/15/EC, or no basis at allNoAsk for a statement against Annex III as amended by Regulation (EU) 2023/1545
Dated before late July 2023, when 2023/1545 was adoptedNoIt cannot be on the expanded basis. Ask for a reissue
Ranges such as 1 to 5%Only as a fallbackAsk for figures. If you must use ranges, calculate with the top of each one and record that you did
Figures given as a percentage of a finished product at an assumed doseNoAsk for percentages of the compound. Their dose is not yours
"Free from" or "none present" with no reporting limitNoAsk for the limit used and check it against your figure from the table above
Names such as d-limonene, linalol or lavender oilNot as label textAsk for glossary names, or look each one up in CosIng before it goes near artwork
No line for essential oils or extracts that are Annex III entriesQuery itAsk whether any such entry is present, even if its constituent molecules are listed
No citral or benzyl salicylate figureQuery itAsk for both, even where they are below the labelling threshold
Reference or version differs from your invoice, SDS or IFRA certificateNoAsk which formula version you are actually receiving
Signed by nobody, or by a sales contact onlyQuery itAsk which function issued it, usually regulatory affairs

The date check is a quick filter. Regulation (EU) 2023/1545 was adopted in late July 2023, so a statement dated earlier than that cannot have been prepared against the expanded list, however it is labelled. The cross-check against the other documents matters more than it looks. If the SDS, the IFRA certificate and the allergen statement carry different references, at least one of them belongs to a different version of the compound. Our guide to reading an SDS and an IFRA certificate shows where each reference sits.

Where the IFRA certificate and the SDS fit

Suppliers often reply with the IFRA certificate first. It is a useful document and it answers a different question. IFRA describes the Certificate of Conformity as a document the fragrance supplier issues, not IFRA, confirming that the mixture complies with the IFRA Standards for an intended use. IFRA's published template states the amendment of the Standards it covers and a maximum use level for each IFRA product category, and it may include an optional table of materials restricted by the Standards. IFRA is clear that the certificate does not replace a safety assessment, and it is not a labelling document. It covers only materials under IFRA Standards, not the Annex III list.

So ask for the IFRA certificate by name, separately. It is also worth knowing that IFRA expects to publish the formal Notification of its 52nd Amendment in January 2027, according to its end of consultation letter, with the new Standards applying to new creations 11 months after Notification and to existing creations after 30 months. Expect certificates to be reissued over that period, and diarise a check.

The safety data sheet is a third thing again. Its composition section lists hazardous constituents for chemical classification, at cut-offs that have nothing to do with cosmetic labelling, so an allergen can be absent from section 3 and still need naming on your pack. Never build an ingredient list from it. Our explainers on IFRA standards and certificates and on when a cosmetic needs a safety data sheet cover both documents properly.

When nothing comes back: the chase

A first email that gets no answer is normal. Chase on a schedule and keep it polite and short.

  • After one week: reply to your own email. "Just checking this reached the right team. Could you confirm receipt and whether [date] works?"
  • After two weeks: copy your account manager and, through a distributor, their technical contact. "We need this to keep [product] on sale in the EU. Who is the best person to help?"
  • After three weeks: ask the direct question. "Will this compound be supported with a statement against the current Annex III, and by when?"

If the answer is vague, treat the compound as at risk and start looking at alternatives now. A replacement compound is a reformulation, with a new safety assessment and possibly new stability work, and that takes far longer than a relabel. The same goes for a reply that says the compound is being reformulated to cut allergens: good for the label, but it is a new material in your formula, so run it through change control rather than filing it as paperwork.

What goes into the PIF, and the clause that saves the next round

File five things together against the compound: your request and the chase emails, the statement you received, a short note of the checks above with the outcome, your finished-product calculation for each product that uses it, and the superseded statement marked with the date it was replaced. Do not overwrite the old one. A question about a product sold last year is a question about what you held last year. Our PIF template and checklist shows where these sit, and the deadline checklist covers the wider evidence pack, so we will not repeat it here.

Then make sure you never have to chase this hard again. At the next renewal of a supply or private label agreement, add a clause along these lines and have your own adviser review the wording for your contract:

"Within [14] days of a written request, the Supplier shall provide a dated statement of the concentration, as a percentage of the product supplied, of each fragrance allergen subject to labelling under Annex III to Regulation (EC) No 1223/2009 as amended from time to time, stating the reporting limit used. The Supplier shall notify the Buyer in writing at least [90] days before any change to the composition of the product supplied that alters that statement, and shall issue a revised statement with the first affected batch."

On Great Britain: as checked on 18 November 2026, the GB version of Annex III still carries only the original allergen entries, while Northern Ireland follows the EU rules, as the OPSS guidance for Northern Ireland explains. A statement prepared against the EU list will also show you the original substances, so in practice one request covers both markets. Keep the EU basis in the wording either way.

Replies in, but not sure they are good enough?

Send us the supplier breakdowns you have received and the fragrance dose of each product. We check every document against the expanded EU list, flag anything undated, incomplete or on the wrong basis, run the finished-product calculations including citral and benzyl salicylate, and give you the allergen names for each label.

Have your allergen data checked Restricted ingredients check

Related reading

Myths we hear

  • Asking for the 82 allergens is the clearest request. The count is disputed and will change again. Asking for the Annex III list as amended by Regulation (EU) 2023/1545 is precise and stays correct.
  • If an allergen is not on the sheet, it is not in the compound. Only if the sheet states a reporting limit low enough for your dose. Without one, a missing name tells you nothing.
  • The IFRA certificate covers allergens. It confirms conformity with the IFRA Standards for stated product categories and use levels. It is not a labelling document and does not cover the Annex III list.
  • The supplier will tell us what to put on the label. The supplier knows the compound, not your dose. The finished-product calculation, and the decision on each name, is yours.
  • A reformulated compound only needs new paperwork. It is a new material in your formula, so the safety assessment and possibly stability need revisiting.

What to do this week

  1. List every fragrance compound and essential oil you buy, with supplier, reference, last batch and the date of the statement you hold.
  2. Work out the reporting limit each one needs from your highest-dose product.
  3. Send the request template per compound, with a reply date ten working days out.
  4. Diarise chases at one, two and three weeks, and keep every email.
  5. Run each reply through the line-by-line check before anyone calculates from it.
  6. Check citral and benzyl salicylate figures against the 2026/909 limits for each product type before 1 January 2027.
  7. File the request, statement, check note, calculation and superseded statement together in the PIF.
  8. Add a data and change-notification clause to each supply agreement at its next renewal.

Frequently asked questions

What exactly should I ask my fragrance supplier for?

A dated allergen statement for the named compound, prepared against Annex III as amended by Regulation (EU) 2023/1545, giving each declarable allergen by its glossary name with CAS number as a percentage of the compound, plus the reporting limit used, citral and benzyl salicylate figures, and a document reference.

Should I ask for an 82-allergen breakdown?

Avoid the number. 82 is the original 26 plus the 56 additions, but two of the 26 were already banned and Annex III has 81 entries with the labelling condition. Ask for the list as amended by Regulation (EU) 2023/1545 and have the supplier state that basis on the document.

What reporting limit should I ask for?

Divide the finished-product threshold by your fragrance dose. For a leave-on product the threshold is 0.001%, so at a 1% dose you need 0.1% of the compound and at a 20% dose you need 0.005%. Use your highest-dose product.

Is an IFRA certificate enough?

No. It is issued by the supplier to confirm conformity with the IFRA Standards for stated product categories and maximum use levels. IFRA says it does not replace a safety assessment, and it does not cover the Annex III allergen list.

What if the supplier only gives ranges?

Ask for single figures. If ranges are all you can get, calculate with the top of each range and note in the file that you did, because a conservative assumption is defensible and an optimistic one is not.

Do I need allergen statements for essential oils too?

Yes. Several allergens occur naturally in essential oils and some oils are Annex III entries in their own right. Ask each oil supplier for a batch certificate of analysis or allergen statement, and use typical values conservatively if that is all that exists.

How long should I give a supplier to respond?

Put a reply date about ten working days out in the first email, then chase at one, two and three weeks. If the answer is still vague, treat the compound as at risk and start on an alternative.

Does the same statement work for Great Britain?

In practice, yes. As checked on 18 November 2026, Great Britain still uses only the original allergen entries, which a statement against the EU list also covers. Northern Ireland follows the EU list and dates.

Official sources and legislation

S
Written by

Syed Muhammad Shamuel Shees

Founder & Lead Compliance Consultant

Phoenix Safety Consultants is a cosmetic compliance consultancy with offices in London, Tallinn and Pensacola. Our safety assessors and toxicologists prepare CPSRs, Toxicological Risk Assessments, PIFs, SDSs and UK/EU notifications for brands of every size. Talk to the team on WhatsApp or at compliance@phoenixcosmeticsafety.com.

Join the conversation