Passer au contenu
Qualified safety assessorsUK · EU · USA
Get a quote
  1. Home
  2. BLOGS
  3. CPNP Article 16 Notification: How the Nano Filing Works Next to Article 13

CPNP Article 16 Notification: How the Nano Filing Works Next to Article 13

The Article 16 filing sits in its own menu, takes different data, can be part-filled by your supplier and starts a six-month clock the day you press Notify

S Syed Muhammad Shamuel SheesFounder & Lead Compliance Consultant
12 min read
Reviewed by Phoenix Cosmetic Safety · Nov 14, 2026
Blue-gloved hands using a spatula to inspect a white cosmetic cream beside jars and laboratory glassware

The short answer

A CPNP Article 16 notification is a second, separate filing for a product containing a nanomaterial, made in the portal's Nanomaterials module six months before the product goes on the EU market. It carries the full nano data set, one notification per nanomaterial, and once you press Notify it cannot be edited. The ordinary Article 13 notification is still needed and can come later. Nano colorants, preservatives and UV filters authorised in the annexes, and nanomaterials that meet an Annex III entry, do not need one.

Key takeaways

  • Article 13 is the notification every product needs. Article 16 is an extra filing for products with a nanomaterial outside the annex route, made six months before launch.
  • The six months run from the day the complete notification is submitted, not from a saved draft. A "Notification treated" status does not shorten it.
  • A supplier can act as your delegate, fill in its part and lock the specification, toxicology and safety data tabs. Only the Responsible Person can enter the yearly quantity and press Notify.
  • It is one Article 16 notification per nanomaterial, and the product name must match the Article 13 notification once the product is on the market.
  • After submission the Commission and the SCCS can each ask once for more information, and the Commission may later restrict the material. None of it is an approval.
  • Omnibus VI would drop the six-month lead time but keep a prior notification. As of 14 November 2026 it is not in force, so plan on six months.

A composite example, drawn from the kind of call we take. A brand has a mattifying primer ready: formula signed off, safety assessment done, Article 13 notification drafted, launch booked with a retailer for the spring. Then the silica supplier's updated specification arrives and the grade turns out to be a nanomaterial. Nobody had made a CPNP Article 16 notification, because nobody had realised the product needed one. The launch moved by six months, and the retailer slot went with it.

The rules on nano ingredients, which forms are allowed and how the label works are covered in our guide to nanomaterials in cosmetics. This article is about the filing itself: what the Article 16 notification is, how it sits next to the ordinary Article 13 notification, who can do which part of it in the portal, what each tab asks for, and how to count the clock it starts.

Two notifications, one product

Article 13 of Regulation (EC) No 1223/2009 is the notification everyone knows. Before a product is placed on the market, the Responsible Person submits its category and name, the Responsible Person's details, the country of origin for imports, the Member State, a contact person, any CMR substances, the frame formulation and, under Article 13(1)(f), the identity of any nanomaterial and the reasonably foreseeable exposure conditions. Nothing is reviewed. Our CPNP field list goes through it.

Article 16(3) adds a second, separate notification for products containing nanomaterials. It goes to the Commission by electronic means six months before the product is placed on the market, and it carries a far deeper data set. The two sit in different parts of the portal and do different jobs:

Article 13 notificationArticle 16 notification
Who needs itEvery cosmetic product placed on the EU marketProducts containing a nanomaterial that is not covered by the annex route (see below)
WhenBefore the product is placed on the market; the label and pack photo once it isSix months before the product is placed on the market
Where in the CPNPProducts menuNanomaterials menu, 'Notify a nanomaterial'
UnitOne notification per product (shades handled inside it)One notification per nanomaterial, per product
Nano contentIdentity of each nanomaterial and the exposure conditions (Article 13(1)(f))Full data set: identity, specification, yearly quantity, toxicological profile, safety data, exposure (Article 16(3))
Who can enter dataUsers of the Responsible Person's organisationThe Responsible Person, plus a mandated delegate who can fill in parts but cannot submit
After submissionCan be updated; nothing is reviewedCannot be edited; the Commission and the SCCS can each ask once for more information
Main audienceMarket surveillance authorities and poison centresThe Commission, and the SCCS if the Commission has concerns

The nano questions inside the Article 13 notification are not a substitute for Article 16. If your product needs both, it needs both.

First, check that you actually need one

Article 16 does not catch every nanomaterial. Article 16(2) excludes nanomaterials used as colorants, UV filters or preservatives regulated under Article 14, unless expressly specified, and Article 16(3) excludes products whose nanomaterials conform with the requirements of Annex III. The Commission's questions and answers on nano notifications put it the other way round: you notify under Article 16 where the nanomaterial is not a colorant, preservative or UV filter and is not otherwise restricted, or where a nanomaterial listed in Annex IV, V or VI is used for a function other than the one it is listed for.

There is one route that does not exist. A nano colorant, preservative or UV filter that is not authorised in nano form must not be notified under Article 16 and cannot be used at all. The six months are not a waiting room for those. The Commission nanomaterials page lists the nano forms that are authorised, and our guides to UV filters and Annex VI, colourants and Annex IV and Annex III restrictions cover the entries themselves. Annex lists change, so check the current entry for your exact material and function before you decide which route you are on.

Whether an ingredient is a nanomaterial at all is a question of the definition in Article 2(1)(k), not of the trade name. The Commission's Q&A says plainly that it is up to the Responsible Person to conclude, checking with the supplier where in doubt.

Who files it: the Responsible Person, a delegate, and the lock

The Responsible Person makes the notification, and stays responsible for it. Article 16(3) also lets it designate another person by written mandate for the notification of nanomaterials, and the CPNP turns that into a separate role: the delegate for nanomaterials. In practice the delegate is often the raw material supplier, because the supplier holds the characterisation and toxicology data and may not want to hand it to every customer.

The CPNP user manual for Article 16 sets out how the split works, and it is worth knowing before you agree anything with a supplier:

  • The delegate only sees the Nanomaterials module. It cannot touch your Article 13 notifications, which the Commission guide to the CPNP also states.
  • The delegate cannot submit. It fills in what it can and clicks "Send to RP". Only the Responsible Person can click "Notify".
  • The quantity is yours. The estimate of nanomaterial placed on the market per year is visible only to the Responsible Person and has to be entered by it.
  • The supplier can lock its data. A delegate can lock the Specification, Toxicological profile and Safety data tabs, so the Responsible Person never sees them. It is all three or none, and only if all three are complete. Identification, Exposure conditions and Other are always visible.
  • Locking has a cost later. If the tabs were locked, the Responsible Person cannot duplicate that notification for the next product; only the delegate can.

So the conversation with a supplier is not just "send us your data". It is "will you act as our delegate, will you lock, and will you be around to answer if the Commission asks a question". That last part matters, because requests for more information go to the delegate first when there is one.

If your Responsible Person is a service provider rather than your own EU company, check that its CPNP set-up and user roles cover this module before you need it. Our guide to CPNP access and roles covers the organisation side, and who notifies and who is liable covers the responsibility side.

The nano module, tab by tab

The notification starts from the Nanomaterials menu, "Notify a nanomaterial". It then runs through a fixed set of tabs, which mirror the list in Article 16(3)(a) to (f). The manual marks some fields as needed to save a draft and others as needed to submit.

TabWhat it asks forWhere the answer usually comes from
IdentificationThe product category (three levels), the foreseen product name, the IUPAC name and other descriptors (INCI, CAS, EC and so on), the class of compound, and a contact personYou, plus the supplier's specification
SpecificationA PDF or ZIP with full characterisation, plus fields for primary particle size (lowest cut-off, volume-weighted and number-weighted median, in nm), secondary particle size, morphology, surface characteristics, solubility, surface area and catalytic or photocatalytic activityThe raw material supplier and its lab
QuantityAn estimate, in kilograms, of the nanomaterial in products you intend to place on the market per yearYou. Only the Responsible Person can see or fill in this field
Toxicological profileA ZIP with a summary of the studies, the studies themselves and the relevant literatureThe supplier; reviewed by your assessor
Safety dataThe Responsible Person's own risk assessment for the nanomaterial in that product categoryYour safety assessor
Exposure conditionsRinse-off or leave-on, the route (dermal, oral, inhalation for sprays) and the concentration in % w/w, with an optional fileYour formula and your assessor
OtherAnything else relevant to the safety assessment, as text or a fileWhoever holds it

A few details from the manual that catch people out:

  • Particle size is reported from the method that gives the lowest result. The SCCS expects more than one measurement method; the lowest volume-weighted or number-weighted median goes in the fields, and the other results go in the attached file.
  • Surface area is mandatory for powders. Both the specific surface area and the volume-specific surface area are required for powders and optional for other materials.
  • Numbers use English notation. 0.3, not 0,3.
  • Write in English. The SCCS works in English, and the manual strongly encourages it for everything you upload or type.
  • Files can be reused. You can reference a specification, toxicological profile, safety data or exposure file you uploaded before. If the specifications differ, you have to explain why the same data still applies. Article 16(3) also lets the Commission issue a reference number for a toxicological profile already submitted, which can stand in for that item.

The manual still points to the original 2012 SCCS guidance on nanomaterials. The SCCS has revised it since, with a second revision (SCCS/1655/23) adopted in June 2023, so make sure your supplier and assessor are working to the current version. For how the same data feeds the safety report, see our post on the toxicological profile in a CPSR.

One notification per nanomaterial

The manual is explicit: if a product contains more than one nanomaterial, make one Article 16 notification per nanomaterial. If a product comes in several shades and each shade contains a different nanomaterial, each is notified. A foundation range with two nano pigments and a nano texturiser is therefore several filings, not one.

The product name matters too. You give the "foreseen" product name, and if the product is already on the market it has to be identical to the name in the Article 13 notification. If marketing renames a product between the two filings, you have a mismatch on the record. Our guide to notifying shades and variants explains how ranges are handled on the Article 13 side.

For the next product using the same material, the Duplicate function copies everything except the product name into a new notification you can edit. That is a real time saver, provided the data was not locked by a delegate.

Counting the six months

Article 16(3) says six months prior to being placed on the market. The Commission and the Article 16 manual say the same. Three practical points follow.

The clock runs from a submitted notification, not a draft. A draft saved by you or sent to you by a delegate has not been notified to anyone. We plan from the day the complete notification is submitted with "Notify", and treat the same date six months later as the earliest possible launch. Submit on 2 March and the earliest date is 2 September. Then we add a margin, because a supplier who takes three weeks to answer a question costs you three weeks.

Nothing you receive shortens it. The manual is clear that the status "Notification treated" does not mean the product can be placed on the market before the six-month standstill ends.

The Article 13 notification can come later. It only has to be made before the product is placed on the market, and the label and pack photo follow when it is, under Article 13(2). The order most people assume, ordinary notification first and nano filing as an afterthought, is backwards. Our CPNP timeline guide shows where the six months sit in a whole launch plan.

Planning rule we use

Settle nano status at formulation stage, get the supplier to commit in writing to the data and its role, submit the Article 16 notification as soon as the data set is complete, and only then book a launch date. If artwork is already at the printer when someone asks the nano question, the date has probably already gone.

What happens after you press Notify

Once notified, the notification cannot be edited. Any change means a reply to a request or a new notification. The manual lists the statuses you may see, from "Notified" through "Notification treated", "Sent to SCCS", requests for additional information and "Opinion given by SCCS". A few rules sit behind them:

  • Each body asks once. The Commission and the SCCS can each use the request-for-information function once. The request names the tabs to complete, and only those tabs open up.
  • Treated is not closed. "Notification treated" can still change to "Sent to SCCS" at any time. Article 16(5) lets the Commission start the procedure whenever it has a safety concern, for example because of new information from a third party.
  • The SCCS has deadlines, and so do you. Under Article 16(4), the SCCS gives its opinion within six months of the Commission's request. If data is missing, the Commission asks the Responsible Person for it within a stated reasonable time, which will not be extended, and the SCCS gives its final opinion within six months of receiving it.
  • The outcome is about the material, not your product. Taking the SCCS opinion into account, and where there is a potential risk, including when data is insufficient, the Commission may amend Annexes II and III (Article 16(6)). That is how a nano ingredient ends up banned or restricted.

None of this is an approval. Silence after six months means you may place the product on the market; it does not mean anyone examined it and found it safe. The safety assessment in your Product Information File is still the control, as our article on what the CPNP does and does not check explains.

Where the Article 13 notification fits

When you later make the ordinary notification, the Commission guide has you answer whether the product contains nanomaterials. If yes, you state whether it is rinse-off or leave-on and the exposure route, then add each nanomaterial, usually by searching CosIng by INCI, IUPAC, CAS or EC number, with at least one function. Use the same identity you used in the Article 16 filing, and the same product name. A mismatch between the two records is the kind of thing an authority notices.

Both filings also feed the Commission catalogue of nanomaterials used in cosmetics, which Article 16(10) requires it to publish. And remember the label: under Article 19(1)(g), every ingredient present as a nanomaterial carries "(nano)" in the ingredient list, whichever route it took.

Is the six-month rule about to change?

Possibly, but not yet. The Commission's Omnibus VI proposal of July 2025 would have removed the separate nano pre-notification. Parliament and Council negotiators reached a provisional deal in June 2026 that keeps a notification to the Commission before the product is placed on the market, but not six months before, according to the Parliament's announcement of the deal. Parliament approved the agreed text in October 2026. As of 14 November 2026, the Council has not formally adopted it and nothing has been published in the Official Journal, so Article 16(3) and its six months apply today.

Our advice: plan any 2027 launch on six months, and treat a shorter lead time as a bonus once the amended text is published and in force. Even then the data set is still needed before launch, so the supplier conversation does not go away. Our nanomaterials guide tracks the change.

Great Britain and Northern Ireland

Great Britain has its own version. The GB text of Article 16 requires the information to go to the Secretary of State at least six months before the product is placed on the market, and the SCPN guidance on nanomaterials confirms that products notified in GB after 1 January 2021 can be placed on the market six months after the nanomaterial is first notified. A CPNP filing does not cover GB, and an SCPN filing does not cover the EU. Omnibus VI does not change the GB rule. Northern Ireland follows EU cosmetics law, so NI products go through the CPNP. Our guides to SCPN vs CPNP and selling in Northern Ireland cover the split.

Not sure whether your product needs an Article 16 notification?

Send us the formula and the supplier documents for any ingredient you are unsure about. We will tell you whether the product needs an Article 16 notification at all, what is missing from the data set, whether your supplier should file its part as a delegate, and the earliest launch date the six months allow.

Talk to us about CPNP notification EU Responsible Person service

Related reading

Myths we hear

  • The nano questions in my Article 13 notification cover it. They do not. Article 13(1)(f) asks for identity and exposure conditions inside the ordinary notification. Article 16 is a separate filing with a much larger data set and its own timing.
  • My supplier can file the whole thing for us. A delegate can enter most of it and lock its confidential data, but it cannot enter the yearly quantity or press Notify. That is always the Responsible Person.
  • Saving a draft starts the clock. A draft has not been notified to the Commission. Plan from the date the complete notification is submitted.
  • "Notification treated" means we are cleared. It does not mean the material is safe, it can still be sent to the SCCS at any time, and it does not let you launch before the six months are up.
  • One Article 16 filing covers the whole range. The manual asks for one notification per nanomaterial, and a separate one for shades that contain a different nanomaterial.

What to do this week

  1. List every product you plan to sell in the EU and ask each supplier, in writing, whether any ingredient meets the Article 2(1)(k) nanomaterial definition.
  2. For each nano ingredient, check its annex entry and function to decide whether you are on the annex route or the Article 16 route.
  3. Ask the supplier whether it will act as your delegate, whether it will lock its data, and who will answer a Commission or SCCS request.
  4. Confirm your Responsible Person has the CPNP access and roles to use the Nanomaterials module.
  5. Work out how many Article 16 notifications you need: one per nanomaterial, per product, including shades with a different nanomaterial.
  6. Prepare the yearly quantity estimate and the exposure details yourself, and have your assessor prepare the safety data to the current SCCS guidance.
  7. Submit with Notify, record the date in your compliance register, and set the earliest launch date six months on.
  8. Use the same nanomaterial identity and product name when you make the Article 13 notification, and add "(nano)" to the ingredient list.

Frequently asked questions

What is the difference between an Article 13 and an Article 16 CPNP notification?

Article 13 is the ordinary notification every cosmetic product needs before it is placed on the EU market. Article 16 is an extra notification for a product containing a nanomaterial outside the annex route. It is filed in the Nanomaterials module six months before launch, with a full data set on the material.

Can my ingredient supplier file the Article 16 notification for us?

Partly. The Responsible Person can mandate a delegate, often the supplier, who fills in the notification and can lock the specification, toxicology and safety data tabs. Only the Responsible Person can enter the yearly quantity and press Notify, and it stays responsible for the filing.

Do I need one Article 16 notification per product or per nanomaterial?

Per nanomaterial. The Commission's Article 16 manual asks for one notification for each nanomaterial in a product, and separate notifications where different shades contain different nanomaterials.

When does the six-month clock start?

We count from the day the complete notification is submitted with Notify, not from a saved draft. Submit on 2 March and the earliest launch is 2 September. Build in a margin for supplier delays.

Can I edit an Article 16 notification after submitting it?

No. Once notified it cannot be edited. You can only change it by replying to a request for information. For the next product, the Duplicate function copies the data into a new notification, unless a delegate locked it.

Does the status "Notification treated" mean I can launch?

No. The manual says it does not allow you to place the product on the market before the six months end, and it can still change to "Sent to SCCS" at any time.

What happens if the Commission asks for more information?

The Commission and the SCCS can each ask once, naming the tabs to complete. Under Article 16(4), data the SCCS needs must be supplied within a stated reasonable time that will not be extended. If a supplier holds the data, agree in advance that it will answer.

Is the EU scrapping the six-month nano notification?

Not yet. The Omnibus VI text agreed in June 2026 and approved by Parliament in October keeps a notification before the product goes on the market but drops the six-month lead time. As of 14 November 2026 it awaits Council adoption and publication, so six months still applies.

Official sources and legislation

S
Written by

Syed Muhammad Shamuel Shees

Founder & Lead Compliance Consultant

Phoenix Safety Consultants is a cosmetic compliance consultancy with offices in London, Tallinn and Pensacola. Our safety assessors and toxicologists prepare CPSRs, Toxicological Risk Assessments, PIFs, SDSs and UK/EU notifications for brands of every size. Talk to the team on WhatsApp or at compliance@phoenixcosmeticsafety.com.

Join the conversation