Skip to content
Qualified safety assessorsUK · EU · USA
Get a quote
  1. Home
  2. BLOGS
  3. What Information Does the CPNP Ask For? The Full Field List

What Information Does the CPNP Ask For? The Full Field List

Every field in a CPNP notification, mapped to Article 13: what each one means, where the data comes from, who reads it, and the mistakes that make authorities look twice.

S Syed Muhammad Shamuel SheesFounder & Lead Compliance Consultant
Updated Nov 8, 2026 16 min read
Reviewed by Phoenix Cosmetic Safety · Oct 31, 2026
Woman typing on a laptop at a desk covered with makeup and skincare products, illustrating the information a CPNP cosmetic notification asks for

The short answer

A CPNP notification asks for the product category and name (with shades and translated names), the Responsible Person, a named contact person, whether the product is imported and from which country, and the Member State where it is first placed on the market. Then come the poison centre fields: physical form, any special applicator, the composition as a predefined frame formulation, exact concentrations or concentration ranges, any CMR or nanomaterial, ingredients of concern and, for products below pH 3 or above 10 or for hair dyes, the pH. Finally you upload the original labelling and a photograph of the pack. Your CPSR, test reports and claims evidence are not uploaded. They stay in the Product Information File.

Key takeaways

  • Article 13(1) of Regulation (EC) No 1223/2009 lists eight items, (a) to (h), plus the labelling in Article 13(2). The CPNP turns them into two tabs: General information and Product details.
  • The Responsible Person details are pulled from SAAS, not typed in, and must match the label exactly. The address you notify is the one where the Product Information File is made readily accessible.
  • The CPNP asks for one Member State: the country of first placing on the market. You do not list every country you sell in.
  • pH is only asked when a product (or a mixed kit) is below 3 or above 10, and always for hair dyes. Ethanol and isopropanol must be declared for every product, even when the answer is "Not available".
  • Competent authorities see points (a) to (g) and the labelling. Poison centres also see the formulation, and may use it only for medical treatment.
  • Updates are triggered by numbers: an ingredient of concern moving by more than 20%, ethanol or isopropanol moving by more than 5 or 10 points, or pH moving by more than 0.5.

"Just send me the list of what the portal asks for." It is the most common email we get from a brand a few weeks before an EU launch, and it is a sensible request. Logging in to the CPNP with half the data means drafts that sit for weeks, and a rushed answer in a field you did not expect is how wrong information ends up in front of a poison centre.

So this is that list, field by field, taken from Article 13 of Regulation (EC) No 1223/2009 and the Commission's own CPNP manual. For each field we say what it means, where the data should come from and who reads it. If you are new to the portal, our guides to what the CPNP is and why notification is not approval set the scene, and CPNP login and access covers getting in.

A note on screens

Field labels move around between CPNP releases. For the current screens, use the Commission's Guide to using CPNP for Responsible Persons and distributors (updated 18 March 2026). The legal list in Article 13 changes far less often, and that is what this article is built on.

CPNP information required: the Article 13 list in one table

Article 13(1) lists eight items, lettered (a) to (h), that the Responsible Person submits before the product is placed on the market. Article 13(2) adds the labelling and a pack photograph once it is placed on the market. The portal spreads them across two tabs, General information and Product details. Here is how they line up.

Article 13 pointWhat the law asks forWhere it sits in the CPNPWho receives it
13(1)(a)Category and name or names, enabling specific identificationGeneral information: product name, shades, languages. Product details: three category levelsAuthorities and poison centres
13(1)(b)Name and address of the Responsible Person where the Product Information File is made readily accessibleGeneral information: Responsible Person, pulled automatically from SAASAuthorities and poison centres
13(1)(c)Country of origin, for importsGeneral information: "Is this product imported?" and country of originAuthorities and poison centres
13(1)(d)The Member State where the product is to be placed on the marketGeneral information: Member State of first placing on the marketAuthorities and poison centres
13(1)(e)Contact details of a physical person to contact in case of necessityGeneral information: contact personAuthorities and poison centres
13(1)(f)Nanomaterials: identification and reasonably foreseeable exposure conditionsProduct details: nanomaterials sectionAuthorities and poison centres
13(1)(g)Name and CAS or EC number of CMR substances, category 1A or 1BProduct details: CMR sectionAuthorities and poison centres
13(1)(h)The frame formulation allowing prompt and appropriate medical treatmentProduct details: physical form, applicator, formulation name, notification type, composition, ingredients of concern, pHPoison centres only
13(2)Original labelling and, where reasonably legible, a photograph of the packagingProduct details: original labelling and original packagingAuthorities and poison centres

The last column matters more than people expect. Under Article 13(5) and (6), national competent authorities get points (a) to (g) and the labelling, for market surveillance. Poison centres get everything, including the formulation, and may use it only for medical treatment. Nobody publishes your notification, and no competitor can look it up.

General information: the fields that identify the product

Industry reference

Your own code for the product, such as a SKU. It is for internal use only, and authorities do not search by it. Fill it in anyway, because it is the fastest way to match a CPNP entry to your own records when you have forty products.

Product name and languages

This is the field authorities and poison centres search on, so the manual is specific. The name should be detailed enough to identify the product and built from the brand, the product line and the specific name, including the function unless it is already obvious. "Novea Repair & Shine smoothing cream" works. "Smoothing cream" or "SKU-1142" does not.

If the product is sold under translated names, each one goes in with its language. "Multilingual" can only be used when the name is identical in every language. A brand selling "Night Recovery Balm" in Ireland and "Baume Récupération Nuit" in France enters both.

Shades

Shades of one product can share a notification, but only if every shade is fully covered by the same data. You list them in the Shades field separated by " / ", up to 2,000 characters. Five lip tints on one base with pigments inside the same declared ranges can go together. A sixth shade with a different pigment load or a new ingredient of concern cannot. Our guide to notifying cosmetic variants covers ranges in more depth.

Products for children under three

A yes or no question: is the product specifically intended for children under three? Answer it from how the product is presented, not from who might end up using it. If the answer is yes, your safety assessment should already reflect that, as our guide to CPSRs for under-threes explains.

Responsible Person and the file address

You do not type the Responsible Person in. The CPNP fills it from the organisation details in SAAS, the Commission's access system, and only a local administrator can change them. The manual is blunt that these details must correspond exactly to the label. If the pack says "Phoenix Example BV, Keizersgracht 1, Amsterdam" and SAAS says "Phoenix Example B.V., Amsterdam", fix one of them before you notify.

Point (b) of Article 13(1) asks for the name and address of the Responsible Person "where the product information file is made readily accessible". There is no separate box for a file address. The notified address is meant to be the place where the file can actually be produced, and Article 19(1)(a) says that if a label shows several addresses, the one where the file is available must be highlighted. If your Responsible Person keeps files somewhere other than its registered office, raise it with them before launch rather than after an authority writes in. And never change the organisation name or country in SAAS once products are notified without speaking to CPNP support. Our CPNP access guide explains why.

Contact person

Point (e) asks for "a physical person to contact in the case of necessity". That means a named human being, with a phone number that includes the international code (the manual's example is +32 2 296 93 62) and an email address. When you add someone, the CPNP emails them a data protection notice, so they will know.

Think about who picks up the phone. A poison centre handling a toddler who has swallowed half a bottle of bath oil needs someone who can answer questions about that product, not a weekday inbox. If a third-party Responsible Person acts for you, ask who their contact person is and what their out-of-hours cover looks like. Contact persons are also managed in their own menu, and changes made there carry through to the notifications, so when someone leaves you fix it in one place.

Import status and country of origin

The CPNP asks whether the product is imported into the EU. If yes, you choose the country of origin, which is where the finished product comes from, not where your brand is based or where the raw materials were bought. A serum filled in South Korea for a London brand and shipped to a Dublin Responsible Person is imported, country of origin South Korea.

Two edge cases from the manual catch people out. If the same product is imported from two countries, you make one notification per country and add the country in brackets to the product name. If one version is made in the EU and another imported, that is two notifications as well. The label must also show the country of origin for imported products under Article 19(1)(a).

Member State of first placing on the market

This one is often misunderstood. The CPNP asks for one country: the Member State where the product is first placed on the market. It is not a list of every market you sell in, and you do not update it when you add Spain or Poland. One notification covers the EU.

The exception sits with distributors. A distributor that makes the product available in another Member State and translates any part of the labelling on its own initiative must submit its own short notification under Article 13(3), linked to your existing notification. That is why the product has to be notified by you first.

End date of responsibility and discontinued products

If the Responsible Person was appointed for a fixed period, there is a field for the end date. There is also a box to tick when a product is no longer manufactured. Neither deletes anything, since a submitted notification can only be updated, but both keep the record honest for products still in circulation.

Product details: what poison centres actually use

CMR substances

You declare whether the product contains any substance classified as carcinogenic, mutagenic or toxic for reproduction, category 1A or 1B, under Part 3 of Annex VI to the CLP Regulation, and identify each one by name and CAS or EC number. These substances are banned in cosmetics unless an exception has been granted under Article 15, after an SCCS evaluation, and the substance is then listed in the annexes with its conditions. For nearly every brand the honest answer is "No". The time to check is during the safety assessment, especially after a reclassification, as our article on CMR reclassification explains.

Nanomaterials

If the product contains a nanomaterial, the CPNP asks two exposure questions first: is it rinse-off or leave-on, and is the exposure route dermal, oral or inhalation? Then you identify each nanomaterial, usually by searching CosIng by INCI, IUPAC, CAS or EC number, and give at least one function. The answer comes from the supplier's specification and particle size data, not from the trade name. Titanium dioxide, zinc oxide and some silicas are the usual suspects.

Timing is the real risk. Under Article 16, a product containing a nanomaterial must also be notified to the Commission six months before it goes on the market. That does not apply to nanomaterials used as colorants, preservatives or UV filters regulated in the annexes, unless the annexes say otherwise, or to products whose nanomaterials meet the conditions of an Annex III entry. If your nanomaterial is outside those, build the six months into the launch plan now.

Category, physical form and applicator

The category is picked in three levels, from broad to specific, and each choice narrows the next list. The full category list is on the CPNP useful links page. Where a product has more than one function, the manual says to use the primary one. A tinted moisturiser with SPF is categorised by whatever it mainly does and how you present it, not by whichever category feels quieter.

Physical form comes from a list. The manual defines "liquid" as typically below 10,000 cP, so a runny lotion is liquid and a thick cream is not. Then you say whether the product comes in ordinary packaging (bottle, jar, sachet) or a special applicator or pack, such as an aerosol or a roll-on. Poison centres use this to judge how someone might have been exposed.

Formulation name and notification type

After the category you pick a formulation name. It refines the category for poison centres only and does not commit you to a frame. Then you choose how to describe the composition:

  • Predefined frame formulation. The CPNP proposes the frame that matches your category and formulation name. You may only use it if every ingredient falls within the frame's ranges. One ingredient above its maximum, or one the frame does not cover, rules it out.
  • Exact concentrations. Every ingredient with its % w/w, uploaded as a clear, typed PDF. Handwritten documents are refused. The manual recommends listing ingredients of concern first, then the rest in decreasing order.
  • Concentration ranges. Ingredients that are not of concern go into fixed bands, from 0.1% or less up to above 75%. Ingredients of concern are still answered with their own figures.

Use INCI names, express quantities in % w/w without the symbol, and write decimals with a point: 0.3, not 0,3. Our guide to frame formulations goes deeper into choosing a frame and why your recipe stays confidential either way.

Ingredients of concern

Whichever type you choose, the CPNP then asks about specific ingredients, based on rules agreed by poison centres, authorities, industry and the Commission. The full rules are in the appendix of the manual. In summary:

Rule in the CPNP manualWhat you declareUpdate needed when
Ethanol and isopropanolThe % w/w for every product, or "Not available" if absent. Values can be rounded to whole numbersEither one, or their sum, moves by more than 5 points (below 30%) or more than 10 points (30% and above)
Essential oils, camphor, menthol, eucalyptolTotal level above 0.5%, then each one above 0.5% (camphor above 0.15%). Perfumes and a few other categories are excludedThe concentration moves by more than 20% of the declared value
Product-type rules (anti-dandruff, anti-hair loss, skin lightening, chemical exfoliants, vitamin A, xanthines, certain cationic surfactants, propellants, hydrogen peroxide, reducing agents, persulfates, hair straighteners, bath salts, fluoride)The INCI name and concentration of the relevant agentThe concentration moves by more than 20% of the declared value
pH below 3 or above 10, and all hair dyesThe pH, or a range of no more than one unit where the manual allows it. Above pH 10, each alkaline agent and its concentrationThe pH moves by more than 0.5
"Other ingredients" flagged by poison centresThe concentration of each listed substance above its threshold, or always where no threshold is setThe concentration moves by more than 20% of the declared value

One detail matters: for ethanol and isopropanol, "Not available" means the substance is absent. For every other ingredient of concern it means absent or below the threshold. A 70% alcohol hand gel and a body mist with 8% ethanol both declare their figure. A shampoo with none ticks "Not available".

pH

The CPNP does not ask every product for its pH. Under the manual's Rule 16, you give it when a single-component product, or a multi-component product once mixed, is below pH 3 or above 10. Hair dyes always declare pH, even inside that range, and a range of no more than one unit is accepted, for example 8.5 to 9.5. Above pH 10 you also give the INCI name and concentration of each alkaline agent, such as sodium hydroxide or ethanolamine.

If you measured the pH through an aqueous solution, extract or dispersion, as you would for a solid, say so in the "other information" box using the manual's wording, "pH (aqueous extract/solution/dispersion)". Our article on pH in cosmetics covers measuring it properly.

Other information of significance for poison centres

A free text box, in English, for anything that helps a poison centre identify the product or judge a case: colour, smell, taste, texture. "Opaque pink gel, strawberry scent, sweet taste" tells a clinician on the phone with a worried parent more than you might think.

Original labelling and the packaging photograph

Article 13(2) asks for the original labelling and, where it is reasonably legible, a photograph of the packaging. "Original" means the version used for first placing on the EU market, and it has to be there at the latest when the product goes on sale. The practical rules from the manual:

  • Upload the labelling of the outer packaging. For a bottle in a box, that is the box; adding the bottle is optional.
  • The labelling means the artwork: text, symbols and pictures, covering every mandatory element in Article 19. Our guide to net quantity, batch code and Responsible Person address lists them.
  • Where mandatory information sits on an enclosed leaflet, tag or card, include that as well.
  • If one notification covers several pack sizes or shades, attach the most legible labelling, usually the biggest pack.
  • Files must be PDF, JPG or JPEG, and all attachments together cannot exceed 2 MB, so compress before you upload.

Kits and multi-component products

A hair colour kit or a two-step peel is notified as one multi-component product, with a tab for each component. The extra questions are about mixing: do the components need to be mixed, is it a hair dye, and if not, is the mixed pH below 3 or above 10? A gift set of separately sold products does not need this route if each item is already notified on its own.

What the CPNP does not ask for

Just as useful is what you never upload:

  • the Cosmetic Product Safety Report;
  • stability, challenge test or microbiology results;
  • claims substantiation;
  • GMP statements and batch records;
  • supplier certificates, IFRA certificates or allergen calculations.

All of that belongs in the Product Information File, kept at the Responsible Person's notified address for ten years after the last batch is placed on the market. The notification is short because the responsibility sits with you, not because the obligations are light. A product notified in an afternoon with no file behind it is still non-compliant. Our PIF vs CPSR guide shows what goes where.

When a field change means an update

Article 13(7) requires an update "without delay" whenever the information in paragraphs 1, 3 or 4 changes. In practice that means a new name, a new Responsible Person, a new contact person, a change of country of origin, a new category, or a formula change beyond the thresholds in the table above. A formula that no longer fits its frame, or an ingredient of concern added or removed, also needs an update.

The CPNP asks you to label each change as an update or a correction. An update means the real product changed, so poison centres keep both versions in case they cannot tell which one a patient used. A correction fixes a mistake in data about the same product. Only an update of the formulation or category creates a new version. Choosing the right label matters to the person reading it at 2 a.m.

Labelling sits in paragraph 2, which Article 13(7) does not name. Even so, if a redesign changes anything in paragraph 1, such as the name or Responsible Person address, the notification has to change too. Most Responsible Persons upload the new artwork after any redesign so the record matches the shelf, and we would do the same.

Collect this before you log in

What you need before you log inWho usually has it
Final artwork for every pack and leafletYour designer or printer, signed off by the Responsible Person
Full product name in every language, plus shade namesMarketing, checked against the artwork
Responsible Person name and address as on the labelThe Responsible Person (it lives in their SAAS organisation)
Contact person with international phone numberThe Responsible Person
Import status, country of origin, first Member StateYour supply chain and launch plan
Full quantitative formula with INCI names and % w/wThe manufacturer or formulator, usually under NDA
Ethanol, isopropanol and other ingredients of concernThe formula, run against the CPNP rules
pH (if below 3 or above 10, or a hair dye), physical form, applicatorThe manufacturer's release specification
Nanomaterial and CMR statusRaw material specifications and the safety assessor

Most delays come from the formula row. Contract manufacturers often hold the quantitative formula and will only release it under an NDA, or will enter it themselves through a sub-organisation. Agree that early.

A composite example: eleven products, five wrong fields

A brand asked us to check eleven notifications made three years earlier by a former distributor acting as Responsible Person. (This is a composite of situations we see, not a single client.) Nothing was dramatic. All of it needed fixing.

  • Four products were notified under development names that never appeared on a pack, so no authority could find them by the shelf name.
  • Products made in Turkey had been notified as not imported, with no country of origin.
  • The contact person had left the distributor 18 months before.
  • A body mist had been reformulated from 18% to 25% ethanol with no update. That is a 7 point change, above the 5 point trigger.
  • The labelling uploads were lifestyle photos in which the ingredient list could not be read.

Moving the products to the brand's new Responsible Person, correcting the names and import status, naming a new contact person, updating the mist and uploading proper artwork took about four weeks. The products themselves did not change. What changed was how they looked to anyone who opened the record.

A quick field check before you press Notify

  • The product name matches the pack, including brand, line and function, in every language.
  • Every shade in the Shades field shares the same composition data.
  • The Responsible Person in SAAS matches the label exactly, and the file is at that address.
  • The contact person is a named person with an international phone number.
  • Import status, country of origin and Member State of first placing are right.
  • The frame, if used, covers every ingredient; ingredients of concern are declared with figures.
  • pH is given if the product is below 3 or above 10, or is a hair dye.
  • Nanomaterial and CMR answers come from supplier data, and any Article 16 notification was made six months ahead.
  • The artwork is final, legible and under 2 MB in total.

If you are pricing the work, our breakdown of what CPNP notification really costs shows where the time goes. Our step-by-step notification guide covers the clicks, and SCPN vs CPNP covers the Great Britain side. If you would rather hand the whole field list over, our CPNP notification service prepares and submits it from your formula and artwork.

Related reading on the Phoenix blog

Myths we hear

  • I have to tick every EU country where the product will be sold. The CPNP asks for the Member State of first placing on the market. One notification covers the EU. Distributors who translate labelling on their own initiative add their own Article 13(3) notification.
  • My safety report gets uploaded with the notification. The CPSR, test data and claims evidence never go into the portal. They stay in the Product Information File at the Responsible Person's address.
  • Every product needs a measured pH in the CPNP. The pH field is triggered for products below pH 3 or above 10, mixed kits in that range, and all hair dyes. A neutral cream does not get a pH question.
  • A frame formulation is fine as long as it is roughly the right product type. A predefined frame can only be used if every ingredient sits within its ranges. Ingredients of concern still have to be declared with their concentration.
  • A lifestyle photo of the pack meets the labelling requirement. You submit the original labelling, meaning the artwork, and a photograph of the packaging where it is reasonably legible. Every mandatory Article 19 element has to be readable.

What to do this week

  1. Pull the final, approved artwork for every product and pack size, plus any leaflet, tag or card that carries mandatory information.
  2. Write the full product name exactly as on the pack: brand, product line and specific name with the function, in every language it is sold under.
  3. Group shades or scents only where the same composition data covers all of them; anything with a different formula gets its own notification.
  4. Confirm the Responsible Person name and address in SAAS match the label character for character, and that the Product Information File really is available at that address.
  5. Choose a named contact person, with a phone number including the international code, who can answer questions about the product.
  6. Record whether the product is imported and the country of origin; if the same product comes from two countries, plan two notifications.
  7. Decide the Member State of first placing on the market.
  8. Get the full quantitative formula (INCI names, % w/w) from the manufacturer, and check it against the predefined frame formulation before choosing frame, exact or ranges.
  9. Run the formula against the CPNP ingredient-of-concern rules: ethanol and isopropanol, essential oils, camphor, menthol, eucalyptol, propellants, hydrogen peroxide and the rest.
  10. Measure pH where the product could be below 3 or above 10, and for every hair dye.
  11. Confirm nanomaterial and CMR status from supplier specifications, and settle any Article 16 nanomaterial notification six months before launch.
  12. Keep a register of every CPNP reference, version and the formula and label each one describes, so you know when an update is due.

Frequently asked questions

What information does the CPNP ask for?

Article 13 of Regulation (EC) No 1223/2009 sets the list. In the portal that means the product category and name, any shades and translated names, the Responsible Person, a contact person, import status and country of origin, the Member State of first placing, physical form, applicator, the composition, ingredients of concern, pH where it applies, CMR substances, nanomaterials, and the original labelling with a photograph of the packaging.

Do I have to list every EU country where my product is sold?

No. The CPNP asks for the Member State where the product is first placed on the market, and one notification covers the whole EU. The separate case is a distributor who translates any part of the labelling on its own initiative to sell in another Member State. That distributor submits its own short notification under Article 13(3).

Is my CPSR uploaded to the CPNP?

No. The portal never asks for the Cosmetic Product Safety Report, stability or challenge test results, claims evidence or manufacturing records. They belong in the Product Information File, which the Responsible Person keeps at the notified address and shows to an authority on request.

Does the CPNP ask for the pH of every product?

No. Under the CPNP rules you give the pH of a product, or of a mixed multi-component product, only when it is lower than 3 or higher than 10. Hair dyes are the exception: their pH is always required, and a range of no more than one unit is accepted. Above pH 10 you also declare each alkaline agent and its concentration.

Do I have to give my exact formula in the CPNP?

Not necessarily. You choose between a predefined frame formulation, exact concentrations or concentration ranges. A frame can only be used if every ingredient falls within its ranges. Whatever you choose, ethanol and isopropanol and any other ingredient of concern above its threshold are declared with their concentration.

Who can see the information in my CPNP notification?

Not the public. National competent authorities receive points (a) to (g) of Article 13(1), the labelling and any distributor notifications, for market surveillance. Poison centres also receive the formulation, and may use the data only for medical treatment.

Can several shades go in one CPNP notification?

Yes, if all of them are fully covered by the same notification data. You list them in the Shades field separated by a forward slash, within the 2,000 character limit. A shade whose composition information differs, for example a pigment above another range, needs its own notification.

When do I have to update a CPNP notification?

Article 13(7) says without delay whenever the Article 13 information changes. The CPNP rules add numbers: an ingredient of concern moving by more than 20% of the declared value, ethanol or isopropanol moving by more than 5 points (or 10 points at 30% and above), a pH change of more than 0.5, or a formula that no longer fits its frame.

Official sources and legislation

S
Written by

Syed Muhammad Shamuel Shees

Founder & Lead Compliance Consultant

Phoenix Safety Consultants is a cosmetic compliance consultancy with offices in London, Tallinn and Pensacola. Our safety assessors and toxicologists prepare CPSRs, Toxicological Risk Assessments, PIFs, SDSs and UK/EU notifications for brands of every size. Talk to the team on WhatsApp or at compliance@phoenixcosmeticsafety.com.

Join the conversation